All Products

SKU: AF-5281

An Alpha 5K linear potentiometer with right-angle PC mount pins spaced at 0.2" — perfect for plugging directly into a breadboard or perfboard during prototyping. When you're ready for a permanent build, mount it to a panel using the included washer and hex nut. Key Features 5K Ohm Linear Taper...

SKU: AF-3393

A dual-ganged 10K linear potentiometer with a built-in on/off switch — two components in one convenient panel-mount package. The dual 10 kΩ linear-taper pots share a grippy shaft that turns smoothly without shifting on its own, and the on/off switch activates at the beginning of the shaft's rotat...

SKU: SF-COM-29199 · MPN: COM-29199

This adjustable dual-gang potentiometer gives you two linked variable resistors on a single shaft, making it handy for interfaces where two channels need to move together. Turn the shaft and the resistance changes, so it can be used to create a variable voltage for an analogue input.Connect VCC t...

SKU: AF-3481

A panel-mount 10 kΩ logarithmic potentiometer with an integrated on/off switch. The logarithmic taper is designed for audio volume control — resistance increases on a curve that matches how the human ear perceives loudness, giving smooth and natural volume adjustment from quiet to full. The buil...

SKU: SF-COM-14624

A panel-mount rotary potentiometer with a 100 kΩ logarithmic taper. Turn the knob and the resistance changes smoothly — ideal for volume controls and other audio applications where a logarithmic response matches human perception. Connect VCC to one outer pin, GND to the other, and the centre pin...

SKU: SF-COM-28384 · MPN: COM-28384

A compact thumbwheel potentiometer for adding analog control to your projects. The ergonomic wheel design allows for easy adjustment with one finger, making it perfect for volume controls, parameter adjustment, and user interfaces. Connect VCC to one outer pin, GND to the other, and the center p...

SKU: LB-50K

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects. The knurled shaft accepts standard potentiometer knobs for easy panel mounting....

SKU: AF-3482

This Panel Mount 10K Dual Logarithmic Potentiometer w/ On-Off Switch is a two-in-one; you get a dual-ganged potentiometer and an on-off switch. For the potentiometer-half, you've got a dual standard log-taper 10Kohm potentiometer, with a grippy shaft. It's smooth and easy to turn, bu...

SKU: AF-3391

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a log taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-points, so you can p...

SKU: AF-1831

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 100K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poi...

SKU: AF-1789

This 1K potentiometer is a two-in-one, good in a breadboard or with a panel. Its a fairly standard linear taper 1K ohm potentiometer, with a grippy shaft. Its smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: AF-562

This potentiometer is a two-in-one, good in a breadboard or with a panel. It's a fairly standard linear taper 10K ohm potentiometer, with a grippy shaft. It's smooth and easy to turn, but not so loose that it will shift on its own. We like this one because the legs are 0.2" apart with pin-poin...

SKU: AF-4219

This 75mm slide potentiometer is a linear 10KΩ pot with a smooth, satisfying action and an included grippy plastic knob with a white position marker. Use it as a voltage divider, input control, or anywhere you need a visual, tactile slider interface. The three solder legs are compatible with bre...

SKU: SF-COM-11620

A compact linear-taper slide potentiometer rated at 10 kΩ and 0.1 W. This small slider features solder tab connections, a 20 mm travel distance, and two mounting holes for easy installation. Key Features Linear Taper – Smooth, proportional resistance change across the travel range Solder Tab ...

SKU: AF-5444

An adapter cable that connects an RP-SMA antenna to RF modules with a w.FL (MHF3 / IPEX3) connector. Essential for adding external antennas to Wi-Fi, Bluetooth, and other RF boards that use the tiny w.FL port — such as the Adafruit Feather ESP32 V2. The cable is just over 20 cm (7.8″) long, with...

SKU: SF-COM-29391 · MPN: COM-29391

This black 25mm potentiometer knob is a simple, sturdy control knob for adding a clean finish to panel-mounted pots and other compatible controls.It slides onto the potentiometer shaft and uses a key lock to help it hold tightly for a strong fit. The main body is metal with a plastic insert, and ...

SKU: LB-LR0589-YELLOW

A 12 mm panel-mount momentary push button with a smooth dome-shaped cap in yellow. Normally open — pressing the button closes the contacts. The dome design provides a satisfying tactile feel and sits flush with the panel surface. Key Features Momentary Action – Normally open, closes on press ...

SKU: AF-2047

A soft-touch T18 potentiometer knob in white with a rubbery grip for comfortable, precise adjustment. Features a white indicator line on the outside for clear position visibility. Designed to press-fit directly onto T18 splined potentiometer shafts for a secure connection. Compatible with standa...

SKU: AF-6072 · MPN: ADA6072

A snap-in panel mount cable with a USB Type A socket on one end and bare power wires on the other. Perfect for adding a USB-A charging or power port to project enclosures without screws or drilling — just cut a rectangular hole and snap it in. The compact panel mount connector fits into a cutout...

SKU: AF-4133

A compact 10K ohm linear potentiometer with a built-in knurled plastic knob — no separate knob needed. The 0.1" pin spacing plugs directly into a standard breadboard, making it perfect for prototyping and quick adjustments. Larger than a trim-pot but smaller than a full-size panel-mount potentio...