All Products

SKU: AF-4706

Gotta say - this Pi 4 is fly.  All the cool kids are going to have it - but all the coolest kids are also going to have a big pack of super cool accessories.We've hand-selected these accessories as the perfect accompaniment to your new Raspberry Pi 4 - Model B.  It's everything you need...

SKU: WS-21802

A complete Jetson Nano development kit that serves as an alternative to the official B01 kit. This kit includes a Jetson Nano module with 16GB onboard eMMC storage plus a 64GB TF card, eliminating the need to purchase storage separately. The carrier board provides nearly identical peripheral int...

SKU: SF-DEV-22659

BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...

SKU: SF-DEV-28021 · MPN: DEV-28021

Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...

SKU: DF-KIT0131 · MPN: KIT0131

Build a DIY water quality monitor for field studies, teaching or environmental projects with the KnowFlow Basic Kit. This Arduino-based kit measures two key water parameters: pH and electrical conductivity (EC).Data can be recorded automatically to a micro-SD card for later analysis, and the Blun...

SKU: SF-SWG-14658

With the cost of microSD cards on a consistent rise, it’s always useful to have an economical and reliable option as a backup for storing your files. This sleek, red 16GB thumb drive has been emblazoned with our SparkFun Electronics logo and our moniker to Start Something! Each thumb drive featu...

SKU: LB-00249

The Raspberry Pi Zero W Kit is a complete starter package that includes everything you need to get up and running with the Pi Zero W. Pre-loaded with NOOBS on a 32GB microSD card, simply plug in and follow the on-screen setup to start building your project. The Pi Zero W adds built-in WiFi and B...

SKU: RP-SC0339G

A 64GB Class 10 MicroSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. Simply insert the card into your Raspberry Pi, power on, and choose from a selection of operating systems to install. NOOBS provides a guided setup experience, making it ideal for fi...

SKU: WS-31284 · MPN: 31282

Built around the ESP32-S3 dual-core processor, this industrial relay module brings local control, networking and edge automation into one DIN-rail friendly unit. It combines 8 relay outputs, 8 digital inputs, isolated CAN, Ethernet, Wi-Fi and Bluetooth for control panels, robotics, smart factorie...

SKU: LB-ZERO2-KIT

The Pi Zero 2 W Kit includes the essentials for getting started with the Pi Zero W, including: Raspberry Pi Zero 2 W Mini HDMI to regular HDMI adapter  Micro USB to regular USB adapter A Pi Zero W Camera Connector 64GB MicroSD (Pre-loaded with NOOBS) A Pi Zero Case with Camera Enclosure ...

SKU: AF-3533

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SPI, making it compatible with virtually any microcontroller — even those with lim...

SKU: LB-ZEROWH-START

The Raspberry Pi Zero WH Starter Kit has everything you need to get started on your Raspberry Pi Zero WH project.With black headers already soldered on you can get straight into adding Hats or jumper wires to connect up your project.Kit includesRaspberry Pi Zero WHClear Zero Case with GPIO spa...

SKU: LB-LR0045

Easily add SD card read/write capabilities to your Arduino projects with this SD card interface module. Designed for simple integration, this module breaks out the standard SD card slot and allows your Arduino to read and write to the card with ease. Featuring a built-in switch to select the fla...

SKU: SF-TOL-09419

The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...

SKU: LB-32G-NOOBS

A Transcend 32GB Class 10 microSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. NOOBS provides a simple menu-driven interface to choose and install your preferred Raspberry Pi operating system on first boot. Includes a full-size SD card adapter. Key Fe...

SKU: DF-DFR1082 · MPN: DFR1082

##Introduction OpenMV Cam RT1060 is a compact, low-power microcontroller board with camera, facilitates the seamless implementation of real-world applications using machine vision. Programming of the OpenMV Cam is accomplished through high-level Python scripts, courtesy of the MicroPython Operati...

SKU: SF-COM-15107

For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and still dwarfs older memory systems like magnetic core memory.This card is not the Ferrari of SD technology, but that’s what makes it perfect to use in pe...

SKU: SF-COM-26322 · MPN: COM-26322

This compact USB-A reader gives you a simple way to access microSD cards from a computer. Plug the adapter into a USB-A port, insert your microSD card, and you can read from or write to the card as needed.No drivers are required, making it a handy tool for moving files, loading data, or checking ...

SKU: AF-5447

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for laptops, MacBooks, and embedded projects where a full-size SD adapter would stick out...

SKU: AF-4027

The Raspberry Pi 3 Model A+ is the latest board for the minimalist Pi fan. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.3/BLE. This low-cost Pi uses the same processor as the model 3 B+, b...