All Products

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: AF-3533

The Adafruit 0.96" 160×80 Colour TFT Display Breakout is a tiny, high-density full-colour screen driven by the ST7735R controller. Despite its thumbnail size, it packs 160×80 RGB pixels and communicates over 4-wire SPI, making it compatible with virtually any microcontroller — even those with lim...

SKU: AF-4438

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap detection, activity detection, a pedometer/step counter, and a programmable fini...

SKU: SF-COM-11913

A green inverter connector cable for use with the INV133 electroluminescent inverter, bridging the gap between your inverter and ELastoLite panels. The 4.5-inch cable has bare wire leads that can be ironed directly onto ELastoLite connect patches for a clean, secure connection. ELastoLite is a w...

SKU: EC-RPA32311R

A high-precision real-time clock (RTC) module based on the DS3231 IC, designed to plug directly into a Raspberry Pi B+ (and compatible with Arduino). The DS3231 maintains accurate timekeeping with ±5 ppm accuracy (±0.432 seconds per day) across −40 °C to +85 °C, and includes a coin cell battery b...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: AF-1643

Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit colour with ~18 mA constant-current drive for consistent brightness regardles...

SKU: SF-DEV-15083

The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout with built-in I²C interface. It handles all interrupt management, switch debouncing, and LED PWM internally, presenting encoder position, button state, and RGB colour control over a simple I²C connection via Qwiic connectors. The ...

SKU: SF-GPS-28929 · MPN: GPS-28929

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG290P module, featuring advanced anti-jamming technology ideal for navigation in ...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5849 · MPN: ADA5849

Incredibly tiny 1111-size (1.1mm × 1.1mm) individually addressable RGB NeoPixel LEDs for creating ultra-compact or high-density smart LED designs. These are the same integrated LED technology used in NeoPixel strips and pixels, but at a fraction of the size — 20× smaller than standard 5050 NeoPix...

SKU: SF-SEN-19764

A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwiic connector system, with 0.1"-spaced pins also broken out for soldered connectio...

SKU: SF-ROB-18591

The Actuonix PQ12-100-6-R is a micro linear actuator with a servo-compatible PWM interface. Weighing just 22 grams with a 20mm stroke, it delivers up to 50N (~5 kg) of force thanks to its 100:1 gear ratio — making it one of the most powerful actuators of its size. The PQ12-R series operates as a...

SKU: DF-FIT0168

A waterproof DC-DC step-down converter that takes 11–35V DC input (compatible with 12V and 24V systems) and outputs a regulated 7.5V at up to 5A (38W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics and outdoor applications. Key Features Wide Input Range –...

SKU: WS-28154 · MPN: 28154

Enhance your project development with the cutting-edge ESP32-S3 4inch Display Development Board, a versatile and powerful tool designed to streamline the creation of high-performance human-machine interfaces (HMI), smart home devices, industrial controllers, and more. Its advanced technical capab...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: AF-6196 · MPN: ADA6196

A warm-white LED filament shaped as the letter "F", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: SF-GPS-27316 · MPN: GPS-27316

The Quectel LG290P is a compact, high-precision GNSS module for demanding positioning applications. It supports quad-band, multi-constellation reception across GPS, GLONASS, Galileo, BDS, QZSS and NavIC, along with SBAS augmentation systems including WAAS, EGNOS, BDSBAS, MSAS, GAGAN and SDCM.Desi...

SKU: AF-5866 · MPN: ADA5866

Add some noodle-y neon bling to your lighting collection with our nOOds - Flexible LED Filament! These 1.2m long filaments come in a vibrant blue color and are perfect for creating fun and unique lighting effects. Made with dozens of micro LED diodes bonded together on a flexible metal backing an...

SKU: SF-COM-18732 · MPN: COM-18732

When your system needs a stable 12V rail from a variable DC supply, this industrial-grade buck-boost converter is built to deliver. It accepts a wide 8 to 36VDC input range and regulates it to 12V for loads up to 6A, or 72W.The buck-boost design automatically switches between stepping voltage dow...