All Products

SKU: DF-SEN0619 · MPN: SEN0619

The DFRobot Gravity: BMM350 3-axis geomagnetic sensor is designed to measure magnetic fields across three vertical axes and functions as a compass. Utilizing Bosch's patented FlipCore technology, this sensor provides accurate spatial orientation without the need for calibration. It maintains comp...

SKU: PL-2739

The Pololu AltIMU-10 v5 is a compact inertial measurement unit (IMU) and altimeter that combines a gyroscope, accelerometer, magnetometer, and barometric pressure sensor on a single board. It provides ten independent measurements — pressure, 3-axis rotation, 3-axis acceleration, and 3-axis magnet...

SKU: SF-SEN-30183 · MPN: SEN-30183

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike basic magnetometers that need to be kept flat, the HMC6343 combines 3-axis magneto...

SKU: DF-FIT0495-H

This is a metal DC geared motor, 34:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 1 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 34:1 Gearbox lengt...

SKU: DF-SER0062

A high-torque brushless waterproof servo delivering up to 45 kg·cm of stall torque at 8.4V. The all-metal gear train and aluminium shell provide exceptional durability, while IP67-rated waterproofing — achieved through laminated circuit boards, waterproof gaskets, and breathable composite sealing...

SKU: DF-FIT0495-I

This is a metal DC geared motor, 20:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 0.7 kg.cm. It is stable and durable! SPECIFICATIONS Rated Voltage: 6 V Operating Voltage Range 2~7.5V Gear reduction ratio: 20:1 Gearbox length...

SKU: PL-1125

A compact, inexpensive brushed DC motor with a 120:1 plastic reduction gearbox, well suited for small robot builds. The motor is rated for 4.5V but runs comfortably in the 3–6V range. The gearbox output shaft is a 3mm D-shape, offset from and parallel to the motor shaft. A built-in safety clutch ...

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: AF-6204 · MPN: ADA6204

A warm-white LED filament shaped as the letter "M", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5857 · MPN: ADA5857

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...

SKU: DF-FIT0869

A 3S (3-series) battery protection module designed for connecting three 18650 or polymer lithium-ion cells in series to create a 12 V rechargeable battery pack. The board provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard your battery pack during charging ...

SKU: DF-FIT0169

A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...

SKU: AF-1361

This conductive material, also known as Velostat or Linqstat, is a handy addition to a wearable and sensor hacking toolkit. It is pressure-sensitive, so squeezing the sheet reduces its resistance, making it useful for experimenting with flexible handmade sensors.It can be used as a lower-cost alt...

SKU: AF-6207 · MPN: ADA6207

A warm-white LED filament shaped as the letter "P", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-6194 · MPN: ADA6194

A warm-white LED filament shaped as the letter "D", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-SER0067 · MPN: SER0067

This high-torque waterproof digital servo delivers up to 35 kg·cm of torque at 7.4V and features a 12-bit magnetic encoder for precise absolute position control across a full 360° range. Built for demanding robotics and automation applications, it combines reinforced steel gears, dual ball bearin...

SKU: SF-COM-26984 · MPN: COM-26984

This compact IR emitter is a light emitting diode designed to transmit infrared signals, such as those used in remote control and generic IR communication projects.It operates at 940nm, making it suitable for common infrared receiver systems. Like any LED, it should be used with an appropriate cu...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: AF-501

This 5V 1A USB power supply provides clean, regulated power for microcontrollers, development boards, and USB-charged devices. It accepts 110–240V AC input and outputs via a USB Type-A port, so you simply plug in whatever USB cable your project needs. The supply is intentionally designed to outp...