All Products

SKU: AF-157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: AF-5990 · MPN: ADA5990

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...

SKU: SF-SEN-10266

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN d...

SKU: LB-LR0309-6

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...

SKU: EC-SPS40201S

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel outputs a low (TTL 0) signal and its indicator LED lights up. Each channel has an onbo...

SKU: DF-DFR1216-1 · MPN: DFR1216-1

This multi-function expansion board adds power, I/O and drive capability to UNIHIKER M10/K10 and micro:bit projects. It is designed for mobile robots, portable interactive builds and maker projects that need more connectivity than the main controller can provide on its own.The board expands your ...

SKU: DF-SEN0503

An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...

SKU: SF-SEN-18772

An Infrared emitter, or IR emitter, is a source of light energy in the infrared spectrum. This little part is a light emitting diode (LED) that is used in order to transmit infrared signals from a remote control. This simple device operates at 940nm and works well for generic IR systems. This emi...

SKU: DF-SEN0523

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...

SKU: SF-COM-26984 · MPN: COM-26984

This compact IR emitter is a light emitting diode designed to transmit infrared signals, such as those used in remote control and generic IR communication projects.It operates at 940nm, making it suitable for common infrared receiver systems. Like any LED, it should be used with an appropriate cu...

SKU: AF-5940 · MPN: ADA5940

This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: DF-DFR1136 · MPN: DFR1136

This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....

SKU: AF-5757

The Mosfetti by Monk Makes is a compact 4-channel MOSFET switch designed for maker projects. Each channel can drive up to 2 A of low-side switching at up to 16 V DC, making it perfect for controlling relays, solenoids, LED strips, pumps, and motors from a microcontroller. Supplied as a PCB with ...

SKU: DF-DFR0094

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...

SKU: AF-6167 · MPN: ADA6167

The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle Motion — dual power options, three level-shifted LED outputs, built-in audio and ...

SKU: AF-6332 · MPN: ADA6332

The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. Powered via USB Type A at up to 5V 2A, it works with off-the-shelf USB battery packs for portable operation. The ESP32 m...

SKU: PL-2463

The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...

SKU: AF-387

Infrared LEDs are used for remote controls (they're the little LED in the part you point at your TV) and 'night-vision' cameras, and these little blue guys are high powered ones! They are 940nm wavelength, which is what nearly all devices listen to. They're 20 degree beamwidth, and work gre...

SKU: AF-2167

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to ...