All Products

SKU: AF-157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just pass...

SKU: EC-SPS40201S

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel outputs a low (TTL 0) signal and its indicator LED lights up. Each channel has an onbo...

SKU: AF-5990 · MPN: ADA5990

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-channel FET at 100–200 mA per LED, you get 10+ metres of transmit range alongside ...

SKU: DF-SEN0503

An infrared break-beam sensor pair for simple, reliable motion detection. The emitter sends a beam of invisible IR light to the receiver — when an object passes between them and breaks the beam, the receiver outputs a signal. Works up to 50 cm at 5 V with a fast response time under 2 ms. The com...

SKU: DF-SEN0239

A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...

SKU: LB-LR0309-6

A matched pair of 5mm infrared LEDs — one transmitter (clear) and one receiver (black) — operating at 940nm. Use them to build object sensors, colour sensors, line sensors, distance sensors, and custom wheel encoders. Specifications Size – 5mm Lead Length – 37mm Wavelength – 940nm (infrared)...

SKU: SF-SEN-10266

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN d...

SKU: LB-OWL-IR

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to build a universal remote control system. Key Features IR Signal Reception – Rea...

SKU: DF-SEN0523

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...

SKU: DF-SEN0347

This infrared photoelectric switch consists of a transmitter and receiver pair that detects objects at distances up to 1.5 m with a response time under 1 ms. The infrared beam provides stable detection regardless of ambient lighting, making it suitable for both indoor and outdoor use across a −20...

SKU: EC-SER14003P1

The CrowPi 3 is an all-in-one portable programming lab with 41 built-in sensors and modules, a 4.3-inch touchscreen, and support for multiple development boards. Compatible with Raspberry Pi 5, micro:bit, Raspberry Pi Pico, and Arduino Nano, it provides a complete platform for learning programmin...

SKU: DF-SEN0143

This Infrared Proximity Sensor made by Sharp (model: GP2Y0A41SKOF) has an analog output which varies from 3.1V (4cm) to 0.3V (30cm) with a supply voltage between 4.5 and 5.5V DC. This sensor is great for sensing objects up to 30 cm away. It has a Japanese Solderless Terminal (JST) Connector whic...

SKU: AF-5940 · MPN: ADA5940

This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...

SKU: DF-DFR0094

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...

SKU: EC-RPA13810C

I am a Raspberry Pi camera that compatible with any version of Raspberry Pi. I can work with infrared lights, support infrared night vision. Even has the function of focus, you can adjust me to observe objects of different distances.  if you want to buy the infrared lights, click hereFeature...

SKU: DF-SEN0116

An AB two-phase optical encoder designed for the DFRobot 2WD MiniQ robot chassis. Uses two infrared reflective sensors to generate quadrature pulse waveforms with approximately 90° phase difference, allowing you to determine both wheel speed and direction of rotation. Mounts directly onto the mo...

SKU: DF-SEN0729 · MPN: SEN0729

This infrared camera module is a night-vision accessory for the HUSKYLENS 2 AI Vision Sensor, helping it see when visible light is unavailable. The lens passes visible light at 650nm and infrared light at 850nm, allowing HUSKYLENS 2 to produce clear black-and-white images in dark environments whe...

SKU: PL-2463

The Vishay TSSP58P38 is a unique modulated IR receiver that is designed for IR brightness detection instead of data communication for remote control. This sensor can be used with a 38 kHz modulated IR emitter and the appropriate algorithms to form a distance sensor with a range of up to a f...

SKU: DF-DFR1136 · MPN: DFR1136

This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....

SKU: SF-SEN-00242

The Sharp GP2Y0A21YK is an infrared proximity sensor with an analogue voltage output that varies with distance — from 3.1 V at 10 cm to 0.4 V at 80 cm. It uses an IR emitter and position-sensitive detector to measure distance, making it unaffected by the colour or reflectivity of most objects. T...