All Products

SKU: AF-1321

A standard alkaline 9V battery for powering portable electronics projects, kits, and prototypes. These batteries use alkaline (MnO2) chemistry with a voltage range of 9.6V (fresh) to 4.8V (depleted). At a 50mA discharge rate, capacity is approximately 500mAh. Specifications Chemistry – Alkalin...

SKU: TB-SB2417

A six-pack of 9V alkaline batteries from Eclipse. Made to the same specifications as premium brands at a more affordable price point — ideal for stocking up for electronics projects, Arduino boards, and general use. Specifications Voltage – 9V Chemistry – Alkaline Pack Quantity – 6 Warranty...

SKU: SF-PRT-10218

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standard disposable battery Rayovac Brand – Reliable performance Also Available 9...

SKU: PL-1155

A compact enclosed battery holder for six AA batteries, providing approximately 9V (alkaline) or 7.2V (NiMH rechargeable) from a series configuration. Features bare wire leads for flexible integration into your project. Key Features 6-Cell Capacity – Holds six AA batteries in series Enclosed ...

SKU: AF-248

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells for 7.2V at ~2000mAh. The 9V alkaline output is ideal for boards with a 5V volta...

SKU: AF-80

A high-quality 9V battery clip with a pre-assembled 5.5mm/2.1mm centre-positive barrel connector. The moulded plastic clip covers the battery terminals to prevent short circuits, and the barrel plug connects directly to Arduino boards and other devices with a standard DC barrel jack. Key Feature...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: AF-67

A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and use the switch to control power. Key Features On/Off Switch – Conveniently co...

SKU: PL-2884

The Pololu D24V150F9 is a high-current synchronous step-down (buck) voltage regulator that converts input voltages up to 40V down to a fixed 9V output. With up to 15 A available output current and typical efficiencies of 80–95%, it's well suited for powering large loads like motors, LED arrays, a...

SKU: DF-FIT0078

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6") red and black wire leads. Specifications Cell Quantity: 6× AA (double layer...

SKU: TB-SB2332

Stock up and save with this bulk pack of 40 AA alkaline batteries. Ideal for keeping your workshop, classroom, or household powered without running out at critical moments. These reliable 1.5V batteries are mercury and cadmium free, making them an environmentally conscious choice for everyday de...

SKU: DF-FIT0266

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black wires for easy connection. Specifications Cell Quantity: 6× AA Output Voltage...

SKU: DF-FIT0141

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: DF-FIT0330

Need a clean energy source for your project? Check out this compact,high quality,high output endurable solar panel.The peak power output is around 9V at 220mA.Can also be used in series to work as recharger for 12V batteries. Ultra-white glass lamination process provides an efficient and waterpr...

SKU: LB-PT12114

A compact, multi-purpose battery tester that quickly checks the charge level of common household batteries. The colour-coded analogue dial gives you an instant good/low/replace reading — no guessing whether that battery in the drawer still has juice. A movable arm accommodates different battery ...

SKU: LB-LR0295

A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. Key Features DC Barrel Connector – Standard connector for easy integration Snap-In Battery Mount – Holds a 9V battery securely Also Available 9V...

SKU: DF-FIT0169

A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...

SKU: AF-875

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. Use alkaline AAs for approximately 12V at 3000–4000 mAh, or rechargeable NiMH cel...

SKU: TB-PH9230

A standard-quality 9V battery clip with flylead connections. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs for reliable everyday use. Specifications Cell Type – 9V Output Connection – Flyleads Cable Length – 150 mm Also Available 9V Battery Snap ...