All Products

SKU: AF-2488

The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. This version come...

SKU: AF-2590

The Adafruit Metro Mini 328 packs the same ATmega328P power as a full-sized Metro into a tiny breadboard-friendly form factor. Running at 16 MHz with 5V logic, it's pin-compatible with Arduino UNO R3 and works with the Arduino IDE by selecting "Arduino UNO" in the Boards menu. For the latest revi...

SKU: DF-DFR0216-2 · MPN: DFR0216-2

This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: AF-4000

The Adafruit Metro M4 Express AirLift combines the powerful ATSAMD51J19 ARM Cortex M4 processor with an on-board ESP32 WiFi co-processor — all in the standard Metro/UNO shield-compatible form factor. With 120 MHz clock speed, floating point support, and built-in TLS/SSL for secure connections, th...

SKU: AF-3382

Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra pe...

SKU: SF-COM-11442

The SparkFun 7-Segment Serial Display combines a 4-digit 7-segment LED display with an ATmega328 microcontroller, allowing you to control every segment using just a few serial lines. It supports three communication interfaces — Serial TTL, SPI, and I²C — making it easy to integrate into a wide ra...

SKU: EC-CDD10240D

The devDuino Relay 1 Node V1.0 is a compact Arduino-compatible microcontroller board with a built-in mains power supply (110–220 V AC), a 10 A relay, and an nRF24L01+ wireless transceiver. It is designed for building wireless home automation networks with support for over-the-air (OTA) firmware u...

SKU: EC-MCA01328A

The Crowduino is Arduino compatible board. Based on Arduino Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs.This Crowduino is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 ...

SKU: AF-2601

The Adafruit RGB Matrix Shield simplifies connecting HUB75-type RGB LED matrices to Arduino-compatible boards. Instead of wiring up a bundle of individual connections, this shield handles all the routing for you — just solder on the headers and connector, plug it onto your board, and attach your ...

SKU: AF-1411

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with a built-in clock — no continuous signal from your microcontroller needed. Up t...

SKU: AF-2010

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based mic...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-2000

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based mic...

SKU: AF-4775

The Adafruit Metro ESP32-S2 combines the popular Arduino UNO shield-compatible Metro form factor with the ESP32-S2 WiFi module. Featuring native USB, 4 MB flash, and 8 MB PSRAM, this board is ideal for WiFi-connected projects using CircuitPython or Arduino — and can even act as a USB keyboard, mo...

SKU: EC-MCA03328M

This Pro Mini version is 100% compatible with the original Arduino Pro mini. We add two analog IO - A6, A7 , and Power Input side add auto recovery insurance, and be allowed USB and Power Supply at same time.It is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input...

SKU: SF-DEV-10914

It’s blue! It’s skinny! It’s the Arduino Pro! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Because the system voltage for this board is lower than other Arduino development boards, it may not be compatible with many Arduino shields which we...

SKU: AF-4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: DF-DFR0010

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...