All Products

SKU: AF-2024

The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — attach one end to the shield and the other to any conductive object like metal, fru...

SKU: AF-4830

The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip conductive materials to the pads and plug into your board's I2C port. The MPR121 h...

SKU: AF-1982

The Adafruit MPR121 Capacitive Touch Sensor Breakout provides 12 channels of capacitive touch sensing over I2C. The MPR121 handles all the capacitive filtering internally and can be configured for varying sensitivity levels, making it far easier to use than raw analog capacitive sensing. With fo...

SKU: EC-AS00121CTH

This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: AF-1947

The 2.8" TFT Touch Shield with Capacitive Touch plugs directly into an Arduino and provides a bright, full-colour display with a smooth glass capacitive touchscreen and onboard MicroSD card socket. Fully assembled and ready to use — no wiring or soldering required. This shield uses SPI for the d...

SKU: AF-2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: AF-1362

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the ...

SKU: AF-2090

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a capacitive single-touch touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two inte...

SKU: AF-5022

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...

SKU: DF-DFR0030

A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...

SKU: AF-1374

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.When a capacitive load is detected (e.g. a person touches the sensor-pad area...

SKU: DF-DFR1092 · MPN: DFR1092

This 3.5-inch display module combines a 480 × 320 IPS panel with capacitive touch for ESP32 and Arduino projects. Its optical bonding process laminates the touch panel and display together, improving clarity while helping reduce reflections and dust ingress.For wiring, the module offers both a st...

SKU: WS-29318 · MPN: 29318

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simple. An onboard voltage translator supports both 3.3 V and 5 V logic levels. Comp...

SKU: LB-LR0214-47

This is a touch sensor for Arduino.   This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC.  With an on-board-level status indicator. Working voltage: 2.0V-5.5V PCB board size: 29 (mm) x16 (mm)

SKU: WS-30499 · MPN: 30499

A compact 1.47-inch IPS LCD display module with an integrated capacitive touch panel. Featuring 172×320 resolution and 262K colours, it delivers crisp, vibrant visuals with wide viewing angles in an ultra-small form factor (22.05 × 41.69 mm). Built around the JD9853 display driver (SPI) and AXS5...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: AF-4964

The Adafruit Rotary Trinkey is a tiny USB A board built around the ATSAMD21 microcontroller with a footprint for a standard rotary encoder and a built-in NeoPixel LED. Plug it into any USB A port on your computer and program it as a volume knob, scroll wheel, zoom control, or any custom rotary in...

SKU: EC-AMS320240TFT

The 2.8" TFT Touch Shield V4.3 is an Arduino-compatible display shield featuring a 240×320 colour LCD with a resistive touchscreen and onboard SD card socket. It communicates over SPI, keeping pin usage low and leaving more pins available for other components. Driven by the ILI9341 controller, t...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...