All Products

SKU: LB-10K-5

A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable for measuring temperatures from −30°C to +110°C. NTC thermistors decrease in r...

SKU: LB-LS2696

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ADC input — just use a voltage divider with a matching 10K resistor. Key Featur...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: LB-LS4792

10PCS 10K NTC Thermistor MF52 Thermal ResistorThis pack includes 10 MF52 NTC thermistors with a 10KΩ nominal resistance, designed for accurate and reliable temperature sensing in electronic circuits. Using MF52AT technology, these thermistors provide stable performance and are widely used in temp...

SKU: AF-4890

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets c...

SKU: DF-SEN0709 · MPN: SEN0709

This industrial-grade ORP (Oxidation-Reduction Potential) sensor is built for reliable water quality monitoring in demanding environments. Its integrated probe and housing measure ORP from -1999 to 1999mV, with RS485 communication for connection into monitoring networks.The sensor supports the st...

SKU: AF-576

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident. To use, sim...

SKU: TB-RN3436

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and monitoring applications. Rugged ceramic construction with tinned copper leads fo...

SKU: DF-DFR0558

This Gravity I2C high-temperature sensor pairs a signal amplification module (MAX31855K) with a stainless steel sheathed K-type thermocouple probe for measuring temperatures up to 800 °C. The module converts the thermocouple's millivolt signal to a 14-bit digital reading over I²C, with cold-junct...

SKU: TB-RN3442

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, and compensation circuits. Dipped in epoxy for durability, this through-hole com...

SKU: DF-SEN0256

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitable for industrial environments. An integrated optical filter blocks visible and ...

SKU: TB-RN3444

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensation, and thermal protection circuits. Key Features NTC Ceramic Construction – R...

SKU: DF-SEN0601 · MPN: SEN0601

The RS485 Soil Sensor provides real-time monitoring of soil temperature, moisture, and electrical conductivity (EC) in a single rugged probe. It communicates via the MODBUS-RTU protocol over RS485, making it easy to integrate with Arduino, Raspberry Pi, and automated irrigation or climate control...

SKU: DF-SEN0707 · MPN: SEN0707

This industrial-grade water electrical conductivity sensor combines the probe and housing in one integrated unit for straightforward installation and reliable EC measurement. With an electrode constant of K=10, it is suited to higher-conductivity water monitoring across aquaculture, tap water, dr...

SKU: AF-270

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface temperatures in high-heat environments such as ovens, kilns, heaters, and industri...

SKU: SF-SEN-00250

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document:  Datasheet Bildr Tutorial

SKU: DF-KIT0021

A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one digital pin for communication. Multiple sensors can share the same data pin thank...

SKU: SF-SEN-18367

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to your microcontroller. It can even be parasitically powered from the data line. Ea...

SKU: DF-SEN0600 · MPN: SEN0600

##Introduction The RS485 Soil Sensor is designed for real-time monitoring of soil temperature and humidity, ideal for large-scale agricultural applications, greenhouse management, and fruit orchards' automatic irrigation systems. Utilizing the MODBUS-RTU protocol via RS485 communication, the sens...

SKU: AF-4712

The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for you, so your project always knows exactly how much battery is left — just like t...