All Products

SKU: AF-2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: AF-3589

The Adafruit PiUART is a compact add-on that provides USB serial console access and switchable power for your Raspberry Pi. It plugs directly onto the GPIO header and connects to your computer via a Micro-USB cable, giving you instant terminal access to the Pi's console — perfect for headless set...

SKU: AF-6066 · MPN: ADA6066

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not being able to reliably drive 5V LED strips — no more flickering or strange colour ...

SKU: AF-4632

The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connect via STEMMA QT / Qwiic and start reading air quality data with no soldering req...

SKU: AF-3284

The Adafruit Pocket Screwdriver is a compact dual-ended tool that clips onto your shirt or pant pocket so you always have a screwdriver on hand. The Phillips head fits 3.5 mm terminal blocks commonly found on electronics breakout boards, while the slotted head works with the nylon screws included...

SKU: AF-3191

The Adafruit Power Relay FeatherWing lets you switch high-power loads — lamps, fans, solenoids, small appliances, and more — directly from any Feather microcontroller board. With a switching capacity of up to 10A at 120 VAC or 5A at 240 VAC (resistive loads), it can handle up to 1,200 watts. The...

SKU: AF-3988

The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...

SKU: AF-4860

The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop-Maker FeatherWing, giving you an accelerometer for swing and hit detection, a C...

SKU: AF-5906 · MPN: ADA5906

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers required. It also adds LiPo battery charging, a power switch, reset button, STEMMA QT ...

SKU: AF-2077

The Adafruit Proto Shield for Arduino (R3) is a versatile prototyping shield with a 0.1" grid, power rails, indicator LEDs, and stacking headers — everything you need to build custom circuits on top of your Arduino. Version R3 is compatible with virtually all Arduino boards including UNO, Mega, L...

SKU: AF-5967 · MPN: ADA5967

The Adafruit Proto Tripler PiCowbell gives your Raspberry Pi Pico or Pico W three side-by-side socket slots — plug in your Pico and up to two PiCowbell accessories with no soldering or stacking headers required. It also includes LiPo battery charging, a power switch, reset button, STEMMA QT conne...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-5905 · MPN: ADA5905

The Adafruit Proto Under Plate PiCowbell is a single-slot prototyping base for the Raspberry Pi Pico or Pico W. It provides a reset button, a STEMMA QT / Qwiic connector, a prototyping grid, and double-row socket headers — all with no soldering required when used with a Pico H or Pico WH. The do...

SKU: AF-2010

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 3V is a compact ATmega328P-based mic...

SKU: AF-2000

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a comparable price. The Adafruit Pro Trinket 5V is a compact ATmega328P-based mic...

SKU: AF-2124

The Adafruit Pro Trinket LiIon/LiPoly Backpack is a tiny add-on board that sits on top of your Pro Trinket or ItsyBitsy, adding rechargeable LiPo battery support with automatic charging and power switching. When USB is connected, the battery charges automatically. Unplug USB and it seamlessly swi...

SKU: AF-5022

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, ambient light, and gesture sensing — plus two NeoPixel LEDs and two capacitive touc...

SKU: AF-3648

The Adafruit PT1000 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter, configured for PT1000 platinum resistance temperature detectors. It reads 2-, 3-, or 4-wire PT1000 sensors over SPI, delivering laboratory-grade temperature accuracy and r...

SKU: AF-3328

The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, delivering laboratory-grade temperature accuracy and repeatability that surpasses therm...

SKU: AF-1400

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once to turn on, press again to turn off. It works with 3–14V DC at up to 3A, with on...