All Products

SKU: AF-6318 · MPN: ADA6318

This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...

SKU: AF-4836

Turn a Wii Nunchuck into a versatile I2C controller for your next project with the Adafruit Wii Nunchuck Breakout Adapter. It fits snugly into the Wii connector and handles level shifting and power regulation, so you can use the controller with any 3.3V or 5V microcontroller. The Wii Nunchuck co...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: AF-6407 · MPN: ADA6407

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer pressure precision than earlier BMP2xx and BMP3xx generations, making it well s...

SKU: AF-5027

The Adafruit MCP9808 is a high-accuracy digital temperature sensor with ±0.25°C typical accuracy over its −40°C to +125°C range and 0.0625°C resolution. It communicates over standard I2C and runs on 2.7V to 5.5V power and logic, making it compatible with virtually any microcontroller or single-bo...

SKU: AF-6491 · MPN: ADA6491

This compact breakout combines a Vishay VCNL4030 proximity sensor and ambient light sensor on one board. It can measure proximity from 0 to 300mm (about 12 inches) and light from 0.004 to 16,768 lux, making it a handy option for touchless controls, presence detection and light-aware projects.The ...