All Products

SKU: DF-FIT0141

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounting holes for secure installation. Specifications Cell Quantity: 6× AA Output...

SKU: LB-LR0294

A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells, ready to plug directly into devices with a standard DC barrel jack ...

SKU: AF-2353

This 7.0" TFT display packs 800×480 pixels with an LED backlight and 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins). It's ideal for projects requiring a large display area for graphics, menus, or data visualisation. This is a raw pixel-dot-clock display ...

SKU: AF-2354

This 7.0" TFT display packs 800×480 pixels with an LED backlight and a 4-wire resistive touchscreen overlay. With 24-bit colour capability via its 40-pin connector (8 red, 8 green, 8 blue parallel pins), it's ideal for projects requiring a large, interactive display area. This is a raw pixel-dot...

SKU: DF-FIT0477

This 7" IPS display is designed specifically for the LattePanda single board computer. Simply connect it via the MIPI FPC connector and power your LattePanda — no extra power cables required. The display border is insulated with black tape to prevent short circuits, making it safe to use even wit...

SKU: DF-FIT0950

This 7" IPS touch display connects to the LattePanda Mu and LattePanda Sigma via eDP (Embedded DisplayPort) interface, delivering excellent visual quality with 1024×600 resolution and full viewing angle support. The multi-touch panel features 6H surface hardness for scratch resistance and a fully...

SKU: SF-COM-18276 · MPN: COM-18276

This is a 715 Ohms SMD resistor with 1/10W power rating and ±1% tolerance, suitable for compact electronics builds, repairs and prototyping.It uses a thick film composition and has two terminations for standard surface-mount assembly. The part is supplied as a single resistor.Features:Moisture Re...

SKU: DF-FIT0145

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide range of battery or power sources. Key Features Wide Input Range – 8–40V DC ...

SKU: WS-24709

The Waveshare PhotoPainter is a 7.3" e-paper display housed in an elegant solid wood frame. Using Advanced Color ePaper (ACeP) technology, it supports 7-colour display with a paper-like viewing experience — no blue light, no eye strain, and images persist without power. With ultra-low power cons...

SKU: WS-24708

The Waveshare PhotoPainter is a 7.3" e-paper display housed in an elegant solid wood frame. Using Advanced Color ePaper (ACeP) technology, it supports 7-colour display with a paper-like viewing experience — no blue light, no eye strain, and images persist without power. With ultra-low power cons...

SKU: WS-30315 · MPN: 30315

The Waveshare PhotoPainter (B) is a 7.3" full-colour e-paper display housed in an elegant solid wood frame. Using E Ink Spectra 6 (E6) technology with six primary colours and advanced dithering, it renders photos and digital content with vivid colour saturation and high contrast — all without the...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: AF-3877

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioning signals. Spec'd for 5V operation but works at 3V as well. High-level inputs ...

SKU: TB-ZC4895

A 74HC595 8-bit serial-in, serial/parallel-out shift register IC in a through-hole DIP-16 package. This tri-state output shift register accepts serial data (SPI) and outputs 8 digital bits in parallel, making it ideal for expanding the number of outputs from a microcontroller. Key Features 8-B...

SKU: AF-450

A pack of three 74HC595 shift register ICs. These chips take a serial input (SPI) of one byte and output those 8 bits onto 8 digital output pins. Chain multiple chips together by connecting the serial output of one to the serial input of the next — three chips give you 24 digital outputs from jus...

SKU: TB-ZS5000

A 74LS00 quad 2-input NAND gate IC in a through-hole DIP-14 package. Contains four independent 2-input NAND gates, one of the most fundamental building blocks in digital logic design. Key Features Quad 2-Input NAND – Four independent NAND gates 74LS Series – Low-power Schottky TTL logic Thro...

SKU: TB-ZS5027

A 74LS27 triple 3-input NOR gate IC in a through-hole DIP-14 package. Contains three independent 3-input NOR gates for digital logic design and signal processing. Key Features Triple 3-Input NOR – Three independent NOR gates 74LS Series – Low-power Schottky TTL logic Through-Hole DIP-14 – Br...

SKU: TB-ZS5086

A 74LS86 quad 2-input exclusive-OR (XOR) gate IC in a through-hole DIP-14 package. Contains four independent 2-input XOR gates, essential for parity checking, arithmetic circuits, and data comparison. Key Features Quad 2-Input XOR – Four independent exclusive-OR gates 74LS Series – Low-power ...

SKU: AF-735

An 8-bit logic level shifter in a breadboard-friendly DIP package. The 74LVC245 converts between 3.3V and 5V logic levels, making it easy to interface modern 3.3V sensors and peripherals with 5V microcontrollers like Arduino. Even when powered at 1.8V, the chip safely accepts up to 5V signals on...

SKU: AF-6396 · MPN: ADA6396

This bare eInk/ePaper display is a large 7.5 inch monochrome panel with 800 x 480 pixels, designed for low-power projects where the image needs to stay visible even after power is removed.Electronic paper displays are high contrast and easy to read in daylight, giving a paper-like look that suits...