All Products

SKU: LB-LR0228

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200 mA running fast Resistance : 31 Ω per coil winding (from Red wire to any coil) ...

SKU: AF-2442

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...

SKU: LB-LS0112-60

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled movement. This variant does not include a speed encoder. Key Features 60 RPM ...

SKU: PR-PIM082

Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. clip compatible pads, coloured LEDs, analog inputs, motor drivers, and a mini breadboard for prototyping your projectsGreat for little robots, games, science ...

SKU: DF-FIT0495-A

A compact metal DC geared motor with a 478:1 reduction ratio, delivering high torque in a small form factor. Rated at 6V with a no-load speed of 15 RPM and a stall torque of 10 kg·cm, it's well-suited for robotics, pan-tilt mechanisms, and other applications requiring slow, powerful rotation. Th...

SKU: DF-FIT0522

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 823.1 counts per revolution of the gearbox’s output shaft. Pinmap These ...

SKU: DF-FIT0565

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 375rpm and the noise is low.     In order to protect the service...

SKU: DF-FIT0564

This is a mini DC motor with a 1:35 reduction box. It has small size and takes up very little space. It uses metal gears which is durable. The D-shape shaft facilitates the installation of motor. The no-load speed is 570rpm and the noise is low.     In order to protect the service...

SKU: DF-FIT0521

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 341.2 counts per revolution of the gearbox’s output shaft.  Pinmap ...

SKU: DF-FIT0578

A compact DC gearmotor with an integrated M3 × 25 mm threaded output shaft, turning it into a simple linear actuator. Rated at 6V with a no-load speed of 98 RPM and a 1:150 gear reduction, it delivers good torque in a tiny package weighing just 10 g. The brass faceplate has two mounting holes th...

SKU: DF-FIT0577

This DC gearmotor are now in the status of Pre-order and will ship in the end of Jun. This DC gearmotor has an integrated M3*20mm threaded rod as its output shaft, turn it into a linear actuator. 6V rated voltage, the no-load speed could arrive 98RPM, equivalent to 1.1mm/s. The brass facepla...

SKU: LB-DCMOTOR

This is Little Birds new Hobby Motor with pre soldered jumper wires, making it super easy to breadboard with. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage of 3.0VDC but can handle a max load...