All Products

SKU: SF-DEV-19957

The SparkFun AzureWave Thing Plus is a Feather form-factor development board equipped with the AW-CU488. The module features the Realtek RTL8721DM integrated single-chip low-power dual-band (2.4GHz and 5GHz) wireless LAN communication controller. It also consists of a dual processor core: Rea...

SKU: AF-1648

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display, for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 300mm long We have cables in 50m...

SKU: SF-GPS-15210

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positional accuracy and faster satellite lock times. The board communicates over I2C ...

SKU: SF-DEV-15164

The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to daisy-chain multiple sensors and log data without occupying your serial port. ...

SKU: AF-6388 · MPN: ADA6388

This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics designs, and it can be paired with a 6-DoF accelerometer/gyroscope to help build ...

SKU: SF-CAB-25596

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and...

SKU: SF-SEN-13715

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is ...

SKU: AF-4209

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remo...

SKU: SF-PRT-27576 · MPN: PRT-27576

Product Overview Meet the SparkFun Navigation Switch, a nifty little addition to your I²C bus that features a 5-way tactile switch akin to a joystick! This compact component allows you to interact with your microcontroller by pushing the switch in any of five directions—up, down, left, right, or...

SKU: DF-SER0033

Herkulex DRS-0201 is state of the art modular smart servos incorporating motor, gear reducer, control circutry and communications capability in one single package. Through metal brush coreless DC motor, it can provide torque up to 24kg.cm at 7.4v. Equipped with a lot of adapting piece...

SKU: AF-4210

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove. This cable can be used with Qwiic bo...

SKU: AF-4397

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium female headers on the other. Compared with the chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel, while being easy to insert and remove.Th...

SKU: AF-5463

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play with and we think it makes for an interesting stretch sensor or maybe a conducti...

SKU: AF-1730

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connector on the Pi and slip this one in.This cable is 18" / 457mm long We have cable...