All Products
Showing 41-53 of 53 products · 7 unavailable products hidden
2.0 320x240 Color IPS TFT Display with microSD Card Breakout
NeoPixel 1/4 60 Ring - WS2812 5050 RGB LED w/ Integrated Drivers
45W DC-DC Converter 9V@5A
Adafruit EYESPI Breakout Board - 18 Pin FPC Connector
Arduino Nano ESP32
Adafruit 1.69" 280x240 Round Rectangle Color IPS TFT Display
Little Bird Lorikeet WS2812B Rainbow Board
Gravity: Analog 20A Current Sensor
MAX30102 Heart Rate Sensor Module
Panel Volt Meter - 4.5V to 30VDC
Adafruit 1.9" 320x170 Color IPS TFT Display
DC-DC Buck Boost Converter Module (5A)
NeoPixel Ring - 16 x 5050 RGBW LEDs w/ Integrated Drivers - Warm White - ~3000K
2.0 320x240 Color IPS TFT Display with microSD Card Breakout
A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...
NeoPixel 1/4 60 Ring - WS2812 5050 RGB LED w/ Integrated Drivers
Build a large 60-LED NeoPixel ring with these quarter-ring segments. Each segment contains 15 individually addressable WS2812 5050 RGB LEDs arranged in a quarter circle — buy four and solder them together to complete the full 6.2" (157 mm) diameter ring. Each LED has an integrated WS2812 driver ...
45W DC-DC Converter 9V@5A
A waterproof DC-DC step-down (buck) converter that accepts 16–36V DC input and outputs a stable 9V at up to 5A (45W). The sealed, shockproof enclosure and 96% efficiency make it well suited for robotics, vehicles, and outdoor installations where reliable voltage regulation is needed. Key Feature...
Adafruit EYESPI Breakout Board - 18 Pin FPC Connector
The EYESPI Breakout Board brings the 18-pin EYESPI FPC connector out to standard 0.1"-spaced headers, making it easy to breadboard and prototype with EYESPI-compatible displays. Each pin is clearly labelled, and for most display projects you only need the left half of the header for power and SPI...
Arduino Nano ESP32
The Arduino Nano ESP32 brings the ESP32-S3 into the familiar Nano form factor, supporting both Arduino and MicroPython programming. Based on the u-blox NORA-W106-10B module, it features Wi-Fi and Bluetooth Low Energy with a built-in antenna, making it ideal for IoT projects. The board runs a 32-...
Adafruit 1.69" 280x240 Round Rectangle Color IPS TFT Display
The Adafruit 1.69" Round Rectangle TFT is a compact IPS display featuring 280×240 pixels at 220 PPI with distinctive rounded corners — ideal for smartwatch-style interfaces and modern electronics projects. The ST7789 driver communicates over 4-wire SPI and works with any microcontroller or microc...
Little Bird Lorikeet WS2812B Rainbow Board
The Little Bird Lorikeet is an Australian-made RGB LED board featuring five individually addressable WS2812B LEDs (NeoPixel-compatible). Control all five LEDs from a single microcontroller pin using the WS2812B serial protocol, with each LED driven at 18 mA constant current for consistent colour ...
Gravity: Analog 20A Current Sensor
The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design and a non-conductive acrylic base plate, it's designed for safe use in automatio...
MAX30102 Heart Rate Sensor Module
The MAX30102 is an integrated heart rate and pulse oximetry (SpO2) sensor module. It combines red and infrared LEDs, a photodetector, and low-noise analogue electronics in a single package, communicating over I²C. Ideal for wearable health monitors, fitness trackers, and biomedical prototyping. ...
Panel Volt Meter - 4.5V to 30VDC
Put a voltage meter anywhere with this very handy display. This panel meter simply connects to whatever DC supply you are trying to track, easy to wire up!Simply connect the red wire to the positive supply, and black to negative ground. The display has a microcontroller that will read the voltage...
Adafruit 1.9" 320x170 Color IPS TFT Display
The Adafruit 1.9" TFT is a wide-format IPS display featuring 320×170 pixels at 16-bit colour with viewing angles up to 80° in any direction. Driven by the ST7789 chipset over 4-wire SPI, this breakout works with any microcontroller — even those with limited memory and GPIO. An onboard 3.3V regul...
DC-DC Buck Boost Converter Module (5A)
A DC-DC buck-boost converter module that accepts input voltages both higher and lower than the desired output, delivering a stable regulated output up to 5A. Two onboard potentiometers let you set the output voltage and maximum current independently. Specifications Input Voltage – 6–35V DC Ou...
NeoPixel Ring - 16 x 5050 RGBW LEDs w/ Integrated Drivers - Warm White - ~3000K
A ring of 16 individually addressable RGBW NeoPixel LEDs with a warm white (~3000 K) channel. Each 5050-sized LED contains red, green, blue, and white elements with integrated drivers, delivering vibrant colours plus a dedicated warm white for natural lighting effects. The ring is chainable — co...