All Products

SKU: AF-2727

This adapter cable converts a 5.5mm/2.1mm DC barrel jack power supply to a Micro USB plug, allowing you to power Micro USB devices from a standard barrel jack power adapter. The barrel jack end is centre-positive polarity. It works great for powering Arduinos, BeagleBones, Raspberry Pis, Android...

SKU: AF-4536

A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and connect straight to a Raspberry Pi 4 or any USB-C device that runs on 5 V without US...

SKU: DF-FIT0881

A 28-piece universal DC adapter kit with 5.5 × 2.1mm female connectors converting to a variety of DC barrel jack sizes. Compatible with standard 2.5mm DC male plugs, this kit lets you power laptops, displays, stereos, and other devices when the original power connector doesn't match. Warning: T...

SKU: AF-5474

A comprehensive set of 30 barrel jack plug adapters that convert a standard 5.5mm / 2.1mm DC jack to a wide variety of other tip sizes. Perfect for powering devices that use non-standard barrel connectors from your existing DC power supplies, USB-C to DC cables, or battery packs. Each adapter pl...

SKU: EC-SES14002K

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successful campaign. The initial users spoke highly of CrowPi and left several good riviews....

SKU: AF-5954 · MPN: ADA5954

The Adafruit TRRS Trinkey is a USB-A plug-in microcontroller designed specifically for assistive technology. It combines an ATSAMD21 processor with a switched TRRS 3.5mm audio jack, connecting all 6 jack pins (tip, ring 1, ring 2, sleeve, plus tip switch and ring 1 switch) to analog-capable GPIO ...

SKU: AF-5976 · MPN: ADA5976

The Adafruit DS2484 is a single-channel I2C-to-1-Wire bus adapter breakout with built-in ESD protection and split supply support. Simply connect it to an existing I2C bus and use the screw terminals to attach DS18B20 temperature sensors or other 1-Wire devices. The 1-Wire protocol, originally de...

SKU: LB-LS6796

 Upgrade your network speed with the UGREEN USB-C to 2.5G Ethernet Adapter. Designed for high-performance connectivity, this adapter allows you to take full advantage of 2500Mbps ultra-fast network speeds, ensuring smoother gaming, faster downloads, and lag-free video streaming.With USB-C co...

SKU: AF-5858 · MPN: ADA5858

Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...

SKU: AF-2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: AF-746

The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate and responsive location data for a wide range of projects. Version 3 introduce...

SKU: DF-DFR0352

This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board. WRTnode (A Mini OpenWRT Dev Board) uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome si...

SKU: AF-18

This USB-to-serial converter adds a DB9 RS-232 serial port to your computer via USB. Based on the FTDI FT232RL chip, it delivers true RS-232 voltage levels (approximately ±10V) rather than TTL 5V — ensuring compatibility with older devices like GPS receivers, handheld programmers, and other equip...

SKU: AF-3133

The Adafruit Ultimate GPS FeatherWing brings precise, low-power GPS to the Feather ecosystem. Built around the MTK3339 chipset, it tracks up to 22 satellites on 66 channels with -165 dBm sensitivity and delivers up to 10 position updates per second — all while drawing only 20 mA. Simply plug the...

SKU: AF-2995

The Feather M0 Bluefruit LE combines an ATSAMD21G18 ARM Cortex M0 processor with a Bluetooth Low Energy module, native USB, and LiPo battery charging. With the power of a 48 MHz ARM core and 256KB of flash, it provides significantly more processing headroom than the 32u4-based Bluefruit while mai...

SKU: AF-3242

The Feather 32u4 Bluefruit LE with Stacking Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with stacking headers pre-soldered so you can plug into a breadboard and stack FeatherWings on top. The Bluefruit module is...

SKU: AF-3379

The Feather 32u4 Bluefruit LE with Headers combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging — with standard headers pre-soldered so you can plug straight into a breadboard. The Bluefruit module is built on the Nordic nRF51822 ...

SKU: SF-CEL-15054

This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter, this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield.

SKU: AF-1013

A 6-foot (~1.8 m) adapter cable that converts a 3.5 mm stereo headphone jack to two colour-coded mono RCA connectors. An essential cable for connecting devices with a headphone or line-out jack to TVs, stereo receivers, amplifiers, and other equipment with RCA inputs. Particularly useful with th...

SKU: AF-2829

The Feather 32u4 Bluefruit LE combines an ATmega32u4 microcontroller with a Bluetooth Low Energy module, USB connectivity, and LiPo battery charging in one compact board. BLE is supported by all modern smartphones and tablets (iOS, Android, Mac OS X, Windows 8+), making it ideal for portable proj...