All Products

SKU: AF-5217 · MPN: 5217

The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly as a compact standalone development board with built-in sensors and STEMMA QT con...

SKU: AF-2946 · MPN: 2946

The Adafruit IS31FL3731 breakout is a charlieplexed PWM LED matrix driver that controls a 16×9 grid of individually dimmable LEDs over I2C. Each of the 144 LEDs can be set to any brightness level with 8-bit (256-level) PWM — no complex wiring or constant signal sending required. The IS31FL3731 o...

SKU: AF-4886 · MPN: 4886

The Adafruit AW9523 GPIO Expander and LED Driver Breakout adds 16 I/O pins to any I2C-capable microcontroller or single-board computer. What sets this expander apart is its built-in 256-step linear constant-current LED dimming — connect LEDs directly without current-limiting resistors for smooth,...

SKU: AF-324 · MPN: 324

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could be driven easily with an Adafruit motor shield for Arduino (or other motor driv...

SKU: AF-4446 · MPN: 4446

The Adafruit eInk Feather Friend is a FeatherWing-format driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any Feather board via SPI, plus a...

SKU: AF-1770 · MPN: 1770

The 2.8" TFT LCD Breakout Board features a bright, full-colour display with a resistive touchscreen and an onboard MicroSD card socket. With 240×320 resolution and individual RGB pixel control, it delivers vivid colour output for interactive projects. The breakout supports two interface modes: 8...

SKU: AF-6126 · MPN: ADA6126

Here is a cute and minimal enclosure for your Adafruit bq25185 USB / DC / Solar Charger with 5V Boost Board to keep it safe during use and transport. This case has been custom-designed and 3D printed to accommodate all the connectors. No screws or glue are required; simply snap the board into the...

SKU: AF-3657 · MPN: 3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...

SKU: AF-5440 · MPN: 5440

The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy world...

SKU: AF-1750 · MPN: 1750

The Synthetos gShield (formerly grblShield) V5 is a 3-axis CNC stepper motor driver shield for Arduino. Designed as a complete hardware companion for the grbl CNC motion control firmware, it turns an Arduino Uno into a capable CNC controller for mills, routers, laser cutters, and other motion-con...

SKU: AF-4489 · MPN: 4489

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip contains one full H-bridges (two half H-bridges). That means you can drive 2 sole...

SKU: AF-5613 · MPN: 5613

The EYESPI Breakout Board brings the 18-pin EYESPI FPC connector out to standard 0.1"-spaced headers, making it easy to breadboard and prototype with EYESPI-compatible displays. Each pin is clearly labelled, and for most display projects you only need the left half of the header for power and SPI...

SKU: AF-5466 · MPN: 5466

A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...

SKU: AF-3244 · MPN: 3244

A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own 2WD mobile robot, with three layers of mounting space for batteries, controller...

SKU: AF-1778 · MPN: 1778

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the temperature as a voltage on the OUT pin — no digital protocols or complex configura...

SKU: AF-6092 · MPN: ADA6092

The Adafruit bq25185 is an all-in-one charging and power supply board that supports USB, DC, and solar charging with an integrated 3.3V buck converter. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, combining power path management and regulated output in a single board. Con...

SKU: AF-2928 · MPN: 2928

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...

SKU: AF-5830 · MPN: ADA5830

This compact Adafruit breakout helps manage two power inputs in a small project, such as a battery, USB supply or DC wall adaptor. It uses the LM66200 dual ideal diode IC to select the higher of two inputs while helping prevent back-powering.Connect your two 2–5V supplies to Vin1 and Vin2, and th...

SKU: AF-2050 · MPN: 2050

A large 3.5" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 480×320 pixel display is driven by the HX8357D chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: AF-2948 · MPN: 2948

The Adafruit LED Charlieplexed Matrix is a 9×16 grid of yellow LEDs arranged in a Charlieplexed configuration. Designed to pair with the IS31FL3731 LED matrix driver, this display lets you create scrolling text, animations, and visual effects with individually controllable LEDs. This is a bare L...