All Products

SKU: AF-931

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-3412

*NOTE - No longer available - however we do have this: Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit] * Remember those cereal commercials that would always say, "part of a complete breakfast"? Well the Pi Zero's a lot like that bowl of cereal - while it's great on its own, y...

SKU: AF-4675

A clear acrylic enclosure designed specifically for the Adafruit CLUE board. Laser-cut to accommodate the TFT display, tactile buttons, and capacitive pads, this minimalist case protects your board while keeping all features accessible. Assembly takes less than five minutes with the included nyl...

SKU: AF-6484 · MPN: ADA6484

This compact full-colour display panel provides a dense 128 × 64 pixel matrix for showing text, graphics and simple animations in projects where you want a high-resolution LED display.Resolution: 128 × 64 pixelsLED type: RGB LED matrixPixel pitch: 2mmFormat: panel-style displayThe fine 2mm pitch ...

SKU: AF-3346

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D amplifier — delivering crisp, static-free stereo sound without relying on the Pi's he...

SKU: AF-5795 · MPN: ADA5795

This square 4 inch TFT panel gives advanced display projects a high-resolution 720x720 pixel canvas with 16-bit full colour. It is an IPS display, so the colour remains strong up to 80 degrees off-axis in any direction.This version does not include a touchscreen. The panel uses an ST7701S TFT dri...

SKU: AF-4079

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear taller components on the Pi or fit more neatly into cases. The header body is ...

SKU: AF-4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-5816 · MPN: ADA5816

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: LB-LS7233

Upgrade your Raspberry Pi experience with our GPIO Expansion Extension Board Screw Terminal Hat! This beautifully designed screw terminal expansion version is the perfect addition to your electronic experiments. Conveniently connect your Raspberry Pi pins with ease using this extension board.The ...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...