All Products

SKU: AF-2674

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the co...

SKU: WS-24691

A compact 1.27-inch RGB OLED display module featuring 128×96 resolution and 262K colours for clear, vibrant visuals. Built around the SSD1351 driver chip with an SPI interface, it requires minimal IO pins and is straightforward to integrate into your projects. Waveshare provides online developme...

SKU: SF-LCD-16398

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB design on the back of the screen by including an ATmega328P that handles all of th...

SKU: AF-5795 · MPN: ADA5795

This square 4 inch TFT panel gives advanced display projects a high-resolution 720x720 pixel canvas with 16-bit full colour. It is an IPS display, so the colour remains strong up to 80 degrees off-axis in any direction.This version does not include a touchscreen. The panel uses an ST7701S TFT dri...

SKU: AF-5827 · MPN: ADA5827

This square TFT module is for advanced display projects that need a dense, eye-catching 480x480 screen. The 4-inch IPS panel provides 16-bit full-colour pixels, with colour that remains clear up to 80 degrees off-axis in any direction.This version does not include a touchscreen. It uses an ST7701...

SKU: WS-29962 · MPN: 29962

Unleash Your Creativity with the Vibrant ESP32-S3 1.3-inch Display Development BoardAre you ready to elevate your project with a splash of color and advanced functionality? The ESP32-S3 1.3-inch Display Development Board is your go-to choice for a high-performance, feature-rich microcontroller un...

SKU: SF-WIG-21277 · MPN: WIG-21277

Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-5799 · MPN: ADA5799

This long rectangular TFT module is made for advanced display projects that need a very wide bar-style screen with plenty of pixels. It has a 3.7" IPS panel with 240x960 18-bit full-colour pixels and good off-axis viewing up to 80 degrees in any direction.The display uses an ST7701S driver with S...

SKU: SF-COM-28380 · MPN: COM-28380

Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...

SKU: AF-5228

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED – 128 × 64 pixel resolution SH1106G Driver – SPI interface 16-Pin FPC Connecto...