All Products

SKU: SF-PRT-10463

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-TOL-25569 · MPN: TOL-25569

This Marlin Screwdriver Set includes 15 of the most useful fixed blade screwdrivers, selected based on data from over 50,000 repair guides on iFixit. With these drivers, you'll be ready for any project that comes your way. Each driver has a swivel top and an ergonomic, knurled, rubberized handle ...

SKU: DF-FIT0194

A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. The male/female design allows standoffs to be stacked for even ...

SKU: AF-1365

A simple acrylic stand that holds a 16×2 character LCD upright on your desk. Made from 3 mm black acrylic with nylon mounting hardware, it assembles quickly and gives your display a clean, professional look. Designed specifically for 16×2 USB/Serial backpack LCDs. Other 16×2 displays (OLED or RG...

SKU: LB-LS0513

M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs M3*6+6mm        25pcs M3*8+6mm        25pcs M3*10+6mm      25pcs M3*12+6mm      25pcs M3*15+6mm &n...

SKU: AF-4807

An acrylic faceplate and hardware kit for the Adafruit MagTag. The kit includes two front plate options — a red arrow and a white cloud — plus a back plate and all the nylon mounting hardware needed for assembly. Takes just a few minutes with a Phillips screwdriver. Key Features Two Faceplate ...

SKU: LB-HS4342

SKU: SF-PRT-15432

These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.Sold individually.Features: Screw, Thread Size: #4-40 Diameter - Outside: 0.250" (6.35mm) 1/4" Hex Between Board Heigh...

SKU: RP-SC1166 · MPN: SC1166

The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 interface, offering quick data transfers up to 500 MB/s. This adapter board features a 16-pin, 0.5mm-pitch FPC connector which is linked to ...

SKU: DF-FIT0064

A 10-pack of M3 × 50mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 50mm spacing and secure mechanical support. At 50mm height, these are the tallest in the range — ideal for multi-level robot chassis builds, e...

SKU: DF-FIT0415

This lightweight nylon pan-and-tilt bracket lets you mount a small camera, sensor, or other module on two servos for full two-axis movement. Compatible with most 9–12 g micro servos, it's a quick way to add directional control to robots, drones, and FPV rigs. Key Features Two-Axis Pan & Tilt –...

SKU: DF-FIT0183

A 10-pack of M3 × 20mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 20mm spacing and secure mechanical support. The male/female design allows standoffs to be stacked for even greater clearance. Ideal for multi-...

SKU: DF-FIT0344

These nylon cable ties will help you bundle up things and make your project tidy. Each comes in white color. They are: Faster - low insertion and pull through force Stronger - high tensile strength is achieved from one piece, advanced pawl, and teeth design Purer - manufacture...

SKU: DF-FIT0063

A 10-pack of M3 × 10mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent spacing and secure mechanical support. Standoffs are ideal for stacking boards in multi-level configurations, such as robot chassis builds or ...

SKU: DF-FIT0184

A 10-pack of M3 × 30mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 30mm spacing and secure mechanical support. The male/female design allows standoffs to be stacked for even greater clearance. At 30mm height, ...

SKU: LB-LS4380

This is an FM Radio Amplifier Mono FM Music Player, designed as a handmade wooden assembly experimental equipment. It features a wooden casing, providing a primitive and rustic design for an FM radio. It can play music from FM radio stations, with a 3W 4ohm speaker that produces cl...

SKU: PI-PZ-57

The Neji-Saurus screw removal pliers feature uniquely designed jaws that firmly grip screw heads, nuts, and bolts – even when they're stripped, rusted, or use tamper-proof heads. When a regular screwdriver just won't cut it, these pliers save the day. The serrated jaws angle inwards to grab the ...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: AF-2865

Put on your sunglasses before plugging in this shield — 40 eye-blistering RGBW LEDs adorn the NeoPixel Shield for a blast of configurable colour and white. Arranged in a 5×8 matrix, each pixel is individually addressable using just one pin (Digital #6 by default, changeable by cutting a trace). ...

SKU: AF-4675

A clear acrylic enclosure designed specifically for the Adafruit CLUE board. Laser-cut to accommodate the TFT display, tactile buttons, and capacitive pads, this minimalist case protects your board while keeping all features accessible. Assembly takes less than five minutes with the included nyl...