All Products

SKU: DF-FIT0186

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearbox's outp...

SKU: DF-DFR0843

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are not compatible. Apart from the poor experience you encountered, this also cause...

SKU: PL-957

This ball caster was originally released as a replacement part for the 3pi robot, but the 1/2″ ball can also be used a replacement part for the newer 3pi+ robot, which has the housing for the ball built directly into the chassis. This ball caster can also be used as a general-purpose ball caster...

SKU: PI-DR-55

A pocket-sized, low-profile offset ratchet driver designed for working in enclosed or restricted spaces. The ratchet head is only 22 mm high, making it ideal for tight areas where standard drivers cannot reach. A switchable ratchet lever allows easy direction changes for tightening or loosening. ...

SKU: SF-TOL-12891

A compact precision screwdriver set with seven interchangeable chrome vanadium bits, designed for working on electronics, small devices, and hobby projects. The anodized aluminium body features a knurled finger grip for controlled, precise turning. Bits store neatly inside the hollow screwdriver...

SKU: AF-822

A compact 38-piece precision screwdriver set designed for disassembling and working with small electronics — phones, cameras, game consoles, and other portable devices. The large rubber-grip handle provides comfortable, non-slip control, and the magnetic bit holder keeps bits securely in place. ...

SKU: SF-COM-09378

Atmel’s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. Documents: Product Card Arduino Board Definitions

SKU: LB-LS3506

This 2×20 pin extra tall male GPIO header stands 12 mm high, providing additional clearance when soldering onto HATs, Bonnets, or custom boards for Raspberry Pi. It's ideal for boards that don't come with headers pre-soldered, or when you need extra height for stacking. Key Features 40-Pin (2×...

SKU: AF-419

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a m...

SKU: WS-26517

The Industrial Modbus RTU 8-Channel Relay Module (D) is a reliable RS485-controlled relay module with 8 digital inputs. Designed for industrial applications, it supports the Modbus RTU protocol and includes multiple isolation protections like power, magnetic, and TVS diode isolation. It features ...

SKU: LB-00339

This is a 5-pin female header, with extra long legs  Pins are spaced by 0.1".    

SKU: EC-AS54887CAN

The ELE CAN-Bus Shield V1.5 adds CAN-Bus communication capability to your Arduino. Built around the Microchip MCP2515 CAN controller and MCP2551 CAN transceiver, it supports CAN V2.0B at speeds up to 1 Mb/s with both standard (11-bit) and extended (29-bit) frames. The shield connects via a stand...

SKU: SF-TOL-15256

The iFixit Essential Electronics Toolkit is a compact repair kit containing the precision tools needed for basic electronics maintenance and repair. It includes a selection of common and specialty driver bits, plastic opening tools, and other essentials for safely disassembling phones, tablets, l...

SKU: EF-EF02037

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN tr...

SKU: EF-EF04076

OCTOPUS OLED Display is an OCTOPUS series electric brick with 128X64 OLED display.OLED display has characters of thin thickness, high brightness, self-emission, wide resolution and visual angle, wide temperature range and low power consumption,etc..It can be used for small patterns, alphabets,...

SKU: AF-5729

Look, over there at that thing! Take it apart! You can now attack just about every kind of box or enclosure that needs undoing with this 9-piece screwdriver set. This kit is of fine quality and excels at disassembling games, phones, cameras, and other small portable electronic goodies.What drew u...

SKU: SF-COM-08530

A jumbo 6.5-inch (153mm tall) single-digit 7-segment display in red. This oversized display is visible from over 30 metres away, making it ideal for large-scale scoreboards, countdown timers, and public-facing numeric displays. Key Features Extra-Large Digit – 6.5" (153mm) tall, visible at lon...

SKU: PI-ANT-BITS

A set of three replacement soldering tips for the Antex XS25 soldering iron. Each tip offers a different profile to suit various soldering tasks, from fine-pitch SMD work to general through-hole soldering. Package Contents No. 51 – 2.3mm needle tip No. 53 – 2.3mm tip No. 55 – 0.5mm pointed t...

SKU: AF-2714

An extra-tall 2×20 SMT (surface-mount) female header designed for Raspberry Pi HATs. The increased height provides additional clearance for stacking multiple HATs or accommodating taller components on the Pi, such as displays and breakout boards. Compatible with all 40-pin Raspberry Pi models in...