All Products

SKU: SF-TOL-18476 · MPN: TOL-18476

Sweepy 2.0 is a clear polycarbonate dust boot for CNC routing, designed to help collect chips and dust around the cutter while keeping the work area visible.This 69mm version is made for Dewalt spindles. It mounts directly to the spindle and clamps in place with a machined quick-release, with a c...

SKU: TB-ST0358

A miniature DPDT toggle switch with a momentary-off-momentary (mom–off–mom) action. The toggle springs back to the centre-off position when released from either direction, making it suitable for joystick-style controls, motor direction switching, and momentary signal routing. Features solder tag...

SKU: SF-TOL-18471 · MPN: TOL-18471

These metric threaded inserts are handy for creating strong, reusable fixing points in jigs, fixtures, wasteboards and other work-holding setups.Install a few in strategic locations to clamp down material, or set them out in a grid pattern to turn a wasteboard into a threaded table. Installation ...

SKU: SF-PRT-09739

A red insulated binding post for connecting single-wire leads. The coloured cap screws up and down to clamp securely onto the connecting wire, and the post accepts standard banana plugs for quick, reliable connections. Key Features Banana Plug Compatible – Accepts standard banana plugs Screw-...

SKU: SF-PRT-11475

A robust 6-pin GX16 aviation-style connector set including both the panel-mount jack and mating plug. The threaded locking ring screws onto the panel connector, creating a secure connection that won't pull apart — ideal for signal or power wiring in enclosures. Key Features Locking Connection ...

SKU: AF-4468

This miniature 5 V cooling fan keeps small computers, FPGAs, motor drivers, and other heat-generating components cool. It features a Molex PicoBlade 1.25 mm pitch 2-pin connector for easy plug-in attachment to compatible board headers, or you can cut the connector off and solder or clamp the wire...

SKU: SF-PRT-21328 · MPN: PRT-21328

This 10-position right-angle terminal block header is made for secure, pluggable wire-to-board connections on a PCB. Solder it directly to your board and use it as the receptacle for a removable screw terminal block.It is well suited to I/O signals and power lines that may need to be disconnected...

SKU: DF-SER0059

A miniature serial bus servo from DFRobot that delivers 2.3 kg·cm of stall torque at 6 V, controllable via TTL serial communication. Up to 253 servos can be daisy-chained in series, each assigned a unique ID for individual or synchronised control at baud rates up to 1 Mbps. The hybrid gear train...

SKU: AF-2456

This medium flip-up toggle clamp provides a quick, reliable way to press and hold PCBs firmly in place during testing, soldering, or pogo-pin bed operations. The rounded rubber tip grips securely without marring or damaging circuit boards, and the height and position are fully adjustable along th...

SKU: LB-FIL-0005

A 1 kg (2.2 lb) reel of 1.75 mm pink ABS (acrylonitrile butadiene styrene) filament for 3D printing. ABS is a strong, durable general-purpose material suitable for prototypes, functional parts, and enclosures. Key Features High Strength – Durable prints suitable for functional parts Acetone S...

SKU: SF-ROB-12607

These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanical device, o...

SKU: AF-1375

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor.This sensor is a toggle output type: touch-on then touch-off. That means that...

SKU: DF-SEN0287

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circuits. Simply clamp the AC transformer probe on the AC line, and then plug the 3.5...

SKU: SF-COM-30157 · MPN: COM-30157

The ATMEGA2560-16AUR is a high-performance, low-power 8-bit microcontroller based on the Microchip AVR enhanced RISC architecture. It is the controller IC used at the heart of the Arduino Mega and many other advanced controller boards, making it a strong choice for complex embedded projects that ...

SKU: AF-1685

A push-button toggle switch with three wire leads. Each press alternates the connection — push once to connect the middle pin to one side, push again to switch it to the other. It functions as a simple, satisfying mechanical toggle without the bulk of a traditional switch. The pre-attached wire ...

SKU: AF-5463

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play with and we think it makes for an interesting stretch sensor or maybe a conducti...

SKU: AF-4117

A flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow in purple. Unlike traditional neon, it requires no special transformers or glass tubing — just connect 9–12 V DC and it lights up. The silicone diffuser creates an even, continuous glow rather than ...

SKU: SF-ROB-12608

These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to incorporate a servo power gearbox into a custom pan & tilt, mechanical device, o...

SKU: SF-PRT-28863 · MPN: PRT-28863

This simple pair of screw clamps is handy for securing parts of your project during mounting, helping keep cables or assemblies neatly held in place.They are the same style of clamps supplied with the Weather Meter Kit, making them useful as replacements, spares, or for similar outdoor sensing an...

SKU: SF-COM-11899

Muscle Wire is a shape memory alloy (Nitinol — nickel-titanium) that contracts when heated or when an electrical current is applied, then returns to its original length when cooled. This property makes it useful as a lightweight, silent alternative to small motors or solenoids in robotic and inte...