All Products

SKU: LB-PT9053

A comprehensive assortment of 600 small stainless steel screws and nuts, perfect for repairing watches, glasses, electronics, and other precision devices. Sizes include M1, M1.2, M1.4, and M1.6 threads. All 12 varieties are neatly organised in a compact plastic storage box with individual compar...

SKU: SF-BOB-15439

The SparkFun PCA9306 Level Translator Breakout provides dual bidirectional voltage-level translation for I2C and SMBus lines. It lets you safely connect devices operating at different logic levels — for example, a 3.3V sensor to a 5V microcontroller — without a direction pin. Simply apply your re...

SKU: SF-SEN-11859

This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emitting, the TMP006 Breakout can determine how hot or cold the object is. The TMP0...

SKU: SF-COM-15093

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. The Single Relay board can handle up to 5.5A at 2...

SKU: SF-PRT-13828

A wide roll of copper tape with conductive adhesive backing. At 50.8 mm (2″) wide and 15.2 m (50 ft) long, this tape is suitable for creating low-profile traces, RF shielding, antenna construction, and paper circuit projects. The conductive adhesive ensures electrical continuity through overlappi...

SKU: SF-SEN-14722

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (Vertical Cavity Surface Emitting Laser) to emit an Infrared laser to time the ref...

SKU: LB-13-PHILLIPS

 Precision Magnetic Screwdriver 1.3 Phillips.  These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.These are also great for doing glasses repair and access to phones.

SKU: DF-DFR1154 · MPN: DFR1154

An intelligent AI camera module built around the ESP32-S3 chip, combining a 160° wide-angle infrared camera, onboard microphone, speaker, and powerful edge AI capabilities. Designed for video processing, image recognition, and voice interaction — all in a compact 42 × 42mm form factor. The modul...

SKU: LB-KEY-SCREW

These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.The screwdriver comes on a handy keyring so you can carry it round.These are also great for doing glasses repair and access to phones.

SKU: SF-TOL-13246

This lead-free tip tinner cleans and re-tins soldering iron tips to restore proper heat transfer and wetting. The mild acid compound removes baked-on residue and oxidation, extending the life of your soldering tips and improving solder flow. Simply dip your hot soldering iron tip into the tinner...

SKU: SF-SEN-13679

The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of ...

SKU: SF-TOL-09200

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap.

SKU: SF-SEN-15441

The SparkFun Lightning Detector adds lightning detection to your next weather station to make sure you are aware of any potential hazardous weather heading your way. The AS3935 is capable of detecting lightning up to 40km away with an accuracy of 1km to the storm front with a sensitive antenna tu...

SKU: SF-SEN-13582

The SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital bits! We have designed the SparkFun Line Follower Arrays to follow a dark line of about ¾ inch width or smaller (spray paint or electrical tape) on a light background. Each...

SKU: SF-PRT-22640

This metal enclosure finished in SparkFun Red will help protect your electronics from harmful contact from outside sources. The body is one piece of aluminum extrusion which contains mounting slots for your PCBs. The front and rear plates are attached with screws. The enclosure is roughly ~2mm th...

SKU: SF-TOL-09327

Solder wick (also known as desolder braid) is made from braided copper threads treated with flux. When placed over an unwanted solder joint and heated with a soldering iron, the flux activates and draws the molten solder up into the braid by capillary action — cleanly removing solder from pads, b...

SKU: SF-KIT-13682

If you do anything with electronics, you’re probably already using transistors, but you’re probably using them in large, prepackaged clusters of just one type. The SparkFun Discrete Semiconductor Kit addresses your needs of only needing one or a couple transistors without you needing go and order...

SKU: SF-PRT-18734 · MPN: PRT-18734

This pre-wired DC supply provides a 13.8V DC output with a constant 8A current, making it useful for LED lighting-type loads and other suitable DC power applications.It accepts an 8-36V DC input through the red and black input leads, and provides output through the yellow and black leads. The uni...

SKU: TB-MB3703

This 4-channel universal charger handles Ni-MH, Ni-Cd, Li-ion, and LiFePO4 cells simultaneously across four independent slots. Each battery is monitored individually by a microprocessor with precise Pulse Width Modulation (PWM) control, ensuring safe and efficient charging. A single Li-ion or LiF...

SKU: SF-SEN-22398

The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise acceleration, angular rate measurement, and intelligent on-chip motion-triggered ...