All Products

SKU: WS-25219

Industrial USB TO 4Ch RS485 Converter, Multi Protection Circuits, Multi Systems Support, Aluminium Alloy Case, Wall-Mount & Rail-Mount Support Industrial USB TO 4CH RS485 Communication Module Stable Transmission | Multi Devices | Multi Systems ...

SKU: DF-SEN0602 · MPN: SEN0602

##Introduction This RS485 soil temperature, humidity, and pH sensor supports a broad voltage power supply range (5-30V) and communicates data through the reliable MODBUS-RTU protocol, allowing for seamless integration into existing automated irrigation systems. It can be paired with an Arduino UN...

SKU: DF-DFR0886 · MPN: DFR0886

Built around the ESP32 dual-core processor, the Edge101 is an industrial IoT controller for taking ESP32 and Arduino-based projects beyond the workbench and into real-world automation, monitoring and edge gateway deployments.It combines isolated RS485 with Modbus compatibility, isolated CAN bus, ...

SKU: SF-BOB-10124

This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount o...

SKU: DF-SEN0592

The ultrasonic distance range sensor uses ultrasonic technology to detect obstacles up to 5 meters away in robot automation control applications. It offers advantages such as small blind zones (Measurement accuracy: 1 + (S * 0.3%) cm), narrow measurement angles (horizontal 40-65°, vertical 6...

SKU: DF-DFR0824

A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolated transceiver for reliable, interference-resistant data transmission — ideal fo...

SKU: DF-FIT0737

This USB to RS485 converter module( USB 1.1，USB 2.0，USB 3.0 compatible) can expand one RS485 asynchronous communication interface from a computer’s USB interface to realize the communication between PC and other RS485 devices.The module uses a PL2303 chip and an easy-to-install driver. There are ...

SKU: DF-SEN0438

This industrial-grade RS485 temperature and humidity sensor features a high-precision digital transducer in a rugged aluminium alloy housing. With a wide measurement range and Modbus RTU communication, it's designed for integration into building automation, HVAC systems, and environmental monitor...

SKU: DF-SEN0519

The DFRobot URM15 is an industrial-grade ultrasonic ranging sensor with an IP65-rated waterproof probe. It provides an effective measuring range of 30–500 cm (tested against a flat wall) and communicates via an RS485 interface using the standard Modbus RTU protocol, making it compatible with PLCs...

SKU: DF-FIT0832

This is an industrial-grade USB to RS485 module with a DC voltage output of up to 36V, which is applicable to industrial instruments that require a high-voltage power supply.  The converter can be directly powered by the USB bus, no external power supply required.With strong compatibility, t...

SKU: EC-MCS01584R

The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino/Crowduino through digital IOs with external 9V DC supply. Compared to...

SKU: EC-MCS02930M

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive the servo with arduino pin9 and pin10. Features Be able to drive 4 DC motor and...

SKU: DF-DFR0944 · MPN: DFR0944

##Introduction The EDGE102-DMX512 controller is an advanced lighting control system designed to manage stage, theater, and venue lighting using the DMX512 protocol. With a variety of interfaces—including RS485, I2C, and UART—this controller supports seamless connections to a range of sensors and ...

SKU: WS-32599 · MPN: 32599

CAN FD Protocol Converter with RS232/RS485 Bidirectional CommunicationIndustrial-Grade Conversion SolutionIntroducing our premium CAN FD Protocol Converter – a dynamic tool designed for seamless communication between CAN FD and serial interfaces. This converter is the ultimate bridge for integrat...

SKU: DF-DFR0285

The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors. ​ SPECIFICATIONS Operating voltage: 3 - 5V Compatible with DFRobot Beetle DOCUMENTS Wiki( Beetle shield) SHIPPING LIST ...

SKU: SF-DEV-28021 · MPN: DEV-28021

Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: EC-MCS01107S

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7) and includes a micro SD card slot for data logging. An active IPC antenna is i...

SKU: DF-SEN0358

DFRobot URM14 RS485 Precision Ultrasonic Sensor(200KHz) is a high-frequency precision ultrasonic sensor for industrial use. The sensor measurement and signal processing unit is completely encapsulated in an M18 metal shell and its tail is designed with an aviation connector plug. The sensor uses ...

SKU: SF-DEV-14352

The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino-based device. This shield connects the I2C bus on your Arduino to a series of SparkFun Qwiic connectors and provides the circuitry to convert the 5V giv...