All Products

SKU: AF-4821

The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applications where precise temperature monitoring is critical, such as thermostats, cold ...

SKU: AF-4885

The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor family, it delivers excellent measurement precision in a compact, easy-to-use breakou...

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: SF-SEN-19037

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter (TDC)...

SKU: SF-SEN-19218

The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...

SKU: SF-SEN-19451

The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is based on Single Photon Avalanche Photodiode (SPAD), time-to-digital converter ...

SKU: AF-5649

The Adafruit QT 3V to 5V Level Booster Breakout lets you connect 3.3 V STEMMA QT / Qwiic devices to sensors and peripherals that require 5 V power or logic. Most modern microcontrollers (ESP32, RP2040, SAMD, micro:bit) run at 3.3 V, but some sensors and modules still need 5 V — this board bridges...

SKU: AF-5637

The Adafruit QT 5V to 3V Shifter Breakout lets you safely connect 3.3 V STEMMA QT / Qwiic sensors to 5 V microcontrollers like the Arduino Uno. Many I2C sensors and Qwiic-compatible devices are not 5 V safe — connecting them directly to a 5 V board risks damage. This breakout handles the voltage ...

SKU: SF-BOB-24474 · MPN: BOB-24474

The SparkFun Qwiic Buzzer adds simple beeps and buzzes to your projects via I2C. Make some noises to alert you when something interesting (or urgent) happens. Simply connect a Qwiic cable and load up some pre-written code to an Arduino to start making noises! The board includes an ATtiny84 with ...

SKU: SF-LCD-22495 · MPN: LCD-22495

A compact monochrome OLED breakout board featuring a 64×48 pixel blue-on-black display (0.66" diagonal). Equipped with two Qwiic connectors for solderless I²C connection, plus 0.1"-spaced header pins for breadboard use. The board includes I²C pull-up and address jumpers on the back for flexible c...

SKU: SF-KIT-30713 · MPN: KIT-30713

Imagine a classroom where students do not just read about the future of agriculture  they build it. The DIY AgXRP Starter Kit is an open-source autonomous robotics platform that bridges the gap between STEM education and sustainable farming. By providing the core electronics and encouraging...

SKU: AF-1083

Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a built-in programmable gain amplifier (up to 16×) for boosting small signals. T...

SKU: AF-3967

The Adafruit VL53L1X (also known as VL53L1CX) is a next-generation Time-of-Flight (ToF) distance sensor from ST with an impressive 4-metre range and LIDAR-like precision. Using an invisible laser and matching sensor, it measures how long light takes to bounce back for accurate, reliable distance ...

SKU: AF-5146

The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist through power cycles and firmware updates — without the page-write constraints o...

SKU: AF-4832

The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH, 0–70°C) and temperature accuracy of ±0.2°C (0–100°C), it delivers reliable env...

SKU: AF-4535

The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 120°C with ±0.5°C accuracy (between 15 and 40°C). An excellent choice for everyday...

SKU: AF-5234

An accessories kit for building a complete Adafruit LED Glasses project. Includes a chunky plastic glasses frame as a mechanical base, a STEMMA QT cable for connecting the LED panel to the driver board, a portable battery holder with belt clip, an extension cable, and mounting hardware. Key Feat...

SKU: AF-5190

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and humidity sensing, providing comprehensive environmental data from a compact modu...

SKU: AF-4479

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring magnetic fields, or pairing with an accelerometer/gyroscope like the LSM6DSOX to...

SKU: AF-5378

The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel to the PCB surface rather than perpendicular — ideal for edge-lit enclosures an...