All Products

SKU: SF-DEV-21252

The Arduino Nano 33 BLE Sense Rev2 packs a powerful nRF52840 processor, Bluetooth 5.0, and an impressive array of on-board sensors into the compact Nano form factor. With a 9-axis IMU, microphone, gesture/light/proximity sensor, barometric pressure, temperature, and humidity sensors built in, it'...

SKU: DF-KIT0234 · MPN: KIT0234

Introduction The WIAnode Sensor Kit is a comprehensive hardware collection designed to bridge the physical world and digital creative environments. Operating as a sensory extension for wireless data interaction nodes, this kit enables instant, virtual-real interaction without the friction of comp...

SKU: AF-3333

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four programming environments: Microsoft MakeCode (block/JavaScript), CircuitPython, Ardu...

SKU: AF-3399

For many years, instructors and teachers have asked us to come up with a better way to teach programming and electronics. We have worked on Circuit Playground Express for over a year to come up with a board that is powerful, beautiful, fun, and perfect for teaching Code.org CS Discoveries Circ...

SKU: AF-3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: DF-KIT0111

The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible with Arduino UNO) along with 12 popular sensors and components from DFRobot's Gra...

SKU: AF-3316

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light sensor (lux), making it a versatile two-in-one module for proximity and light measure...

SKU: AF-3317

The Adafruit VL53L0X is a Time-of-Flight (ToF) distance sensor from ST that uses an invisible laser to measure distances from approximately 50 mm to 1200 mm. By timing how long the laser light takes to bounce back, it delivers precise distance readings without the linearity issues or double-imagi...

SKU: DF-KIT0130

micro:bit is a pocket-sized microcontroller designed for kids and beginners learning how to program, letting them easily bring ideas into DIY digital games, interactive projects and robotics.micro:bit comes with a variety of on-board modules, including a 5x5 LED matrix (also supports light detect...

SKU: AF-4022

Measure invisible magnetic fields with the Adafruit Wide-Range Triple-axis Magnetometer, featuring the MLX90393 sensor. With 16-bit resolution across all three axes and a dynamic range of ±5 mT to ±50 mT, this sensor is ideal for detecting magnets and magnetic orientation rather than the Earth's ...

SKU: AF-982

The LV-EZ4 from MaxBotix is a compact ultrasonic rangefinder that detects objects from 0 to 254 inches (6.45 metres), with calibrated range output from 6 to 254 inches at 1-inch resolution. Objects closer than 6 inches are reported as 6 inches. The EZ4 features the narrowest beam angle in the LV-...

SKU: DF-ROB0025

INTRODUCTION The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic m...

SKU: AF-3795

The Code.org CS Discoveries course is a yearlong curriculum for teaching computer science, and there's even a physical computing unit! For large classrooms and workshops, we recommend our Code.org Classroom pack. But, if you need to supplement your Classroom pack or are learning on your own, w...

SKU: SF-KIT-15367

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic connectors to your Pi's GPIO header, along with three sensor/display breakouts and ...

SKU: DF-SEN0276

The MB1009 ParkSonar-EZ-144 is an ultrasonic proximity and range sensor from MaxBotix, designed to detect vehicles within a calibrated detection zone. It reports when a target enters or leaves the zone, with both proximity and range data available via logic-level (high/low) and RS232 serial outpu...

SKU: AF-4366

The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-bit resolution — ideal for applications like DIY joysticks, position sensing, or...

SKU: DF-KIT0152-EN

MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the lower grade to the higher grade. It comes with an Arduino Uno R3 mainboard and a ...

SKU: LB-LS1697

This is the Light and Colour Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and colour measuring, proximity detection, and touch-less gesture sensing. With this Light and Colour Sensor you will be able to control a computer , Microcontroller, and...

SKU: AF-5396

The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between the close-range VL6180X and the longer-range VL53L0X — all using an invisible l...

SKU: PR-PIM510

A Raspberry Pi-powered plant monitoring system that tracks moisture levels across up to three pots, alerts you when plants need water, and can even automate watering with optional pumps. The kit centres around the Grow HAT Mini, a compact add-on board with a built-in LCD, buttons, buzzer, and lig...