All Products

SKU: AF-4899

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512 MB FAT volume and works straight away with the built-in SD library in Arduino o...

SKU: AF-5447

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for laptops, MacBooks, and embedded projects where a full-size SD adapter would stick out...

SKU: LB-RPI5-CB-8GB

Introducing our Raspberry Pi 5 Cooling Combo In the box, you'll find: Raspberry Pi 5: Experience the power of the latest Raspberry Pi model, packed with advanced features and capabilities. Active Cooler: Keep your Raspberry Pi 5 running smoothly with our efficient cooling solution. GPIO Pin...

SKU: LB-32G-MICROSD

A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...

SKU: EC-ASC7503RTC

The RTC Data Logger Shield adds SD card storage and a real-time clock to your Arduino, making it straightforward to log timestamped sensor data. It supports SD, SDHC, and microSD TF cards via an onboard toggle switch to select the card type. The shield is compatible with 3.3V and 5V logic levels...

SKU: SF-DEV-22692

The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with onboard Wi-Fi, Bluetooth Low Energy, and 100 Mbps Ethernet for connected applicat...

SKU: SF-DEV-11287

The Arduino WiFi Shield allows an Arduino board to connect to the internet using the 802.11 wireless specification (WiFi). It is based on the HDG204 Wireless LAN 802.11b/g System in-Package. An Atmega 32UC3 provides a network (IP) stack capable of both TCP and UDP. Use the WiFI library to write s...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: AF-3687

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with an SD Card Extender . This simple, but effective device gives you a long flexible cable, a pseudo-card on one end, and an SD card socket on the other. Plug in the SD card half and attach the s...

SKU: SF-DEV-10524

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you wi...

SKU: DF-SEN0504

TF02-i LiDAR is an industrial-grade medium-range distance sensor. Its maximum detection range can reach up to 40m and it has an adjustable frame rate with a maximum of 1KHz.This rangefinder has a PC/ABS/PMMA enclosure with IP65 water and dust resistance. It supports a wide range of input voltages...

SKU: SF-WRL-24806 · MPN: WRL-24806

The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V core clocked up to 160 MHz plus a low-power RISC-V core at 20 MHz, it offers stro...

SKU: SF-COM-09378

Atmel’s itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit. Documents: Product Card Arduino Board Definitions

SKU: DF-DFR0489

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC and multiple interfaces such as HSPI, UART, PWM, I2C and I2S. In DTIM10, the full ...