All Products

SKU: SF-SEN-00251

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: AF-3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-987

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...

SKU: AF-3538

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera you can integrate into any microcontroller or Raspberr...

SKU: AF-3622

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like a compact thermal camera in FeatherWing form factor. The AMG8833...

SKU: AF-6027 · MPN: ADA6027

The Adafruit DS2482S-800 is an 8-channel I2C-to-1-Wire bus adapter on a STEMMA QT breakout board. It allows any I2C-capable microcontroller or single-board computer to communicate with 1-Wire devices — most commonly DS18B20 temperature sensors — without needing to bit-bang the 1-Wire protocol. T...

SKU: SF-SEN-13715

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is ...

SKU: AF-3251

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperature accuracy from −10 to +85 °C, all communicated over a simple I2C interface. ...

SKU: SF-TOL-18341

The Artech A5020 is a 4000-count True RMS digital multimeter with Smart Measurement — it automatically identifies whether you're measuring AC voltage, DC voltage, resistance, or continuity, and auto-ranges to the optimal setting for accuracy. Beyond standard voltage and current readings, the A50...

SKU: AF-3006

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω speaker, it's a compact and efficient way to add amplified sound to your Raspberr...

SKU: AF-4282

The Adafruit PiRTC Precise DS3231 is a high-accuracy, battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header. Built around a genuine Maxim DS3231 with an integrated temperature-compensated crystal oscillator (TCXO), it delivers exceptional timekeeping accuracy — f...

SKU: AF-4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: AF-3093

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit see...

SKU: AF-2652

The Adafruit BME280 Breakout is a precision environmental sensor from Bosch that measures temperature, barometric pressure, and humidity in a single package. With its excellent pressure accuracy, it also functions as an altimeter with approximately ±1 metre resolution. The breakout includes a 3....

SKU: AF-1083

Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a built-in programmable gain amplifier (up to 16×) for boosting small signals. T...

SKU: AF-4634

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope into a single chip for full orientation tracking. This version featur...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-5690

The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalone dev board and an I2C peripheral that adds GPIO, ADC, PWM, and NeoPixel support...

SKU: SF-PRT-21306 · MPN: PRT-21306

This thermocouple connector is designed to bridge Type-K thermocouples with standard connectors to a printed circuit board.Each connector can be attached to a PCB using the included mounting clip, making it a practical choice for temperature-sensing projects and custom instrumentation builds.Use ...