All Products

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: AF-715

The Adafruit I²C Controlled + Keypad Shield Kit lets you drive a 16×2 character LCD and read 5 navigation buttons using only two I²C pins on your Arduino. This frees up the 9+ digital pins that a standard LCD connection would require, while still allowing other I²C devices to share the bus. The ...

SKU: AF-1333

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this sort of switch and have an LED as feedback (say, to indicate that an action is occ...

SKU: PR-PIM551

Scoring very highly in the Pimoroni "things on our desk that make people say ooo" rankings, RGB Keypad Base equips a Pico with an eye-catching 4x4 silicone keypad, fully loaded with addressable APA102 LEDs so that each key can be illuminated in any colour that your little unicorn heart desires...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: AF-5071

A premium milled and anodised aluminium enclosure for building a custom 4×4 mechanical keypad. The dark grey shell with silver accents provides a solid, professional-looking base for your macro pad or shortcut keypad project. The multi-part enclosure features a hinged design that lets you angle ...

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: DF-DFR0376

INTRODUCTION OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 screen brightness with extremely high contrast and readability; moreover, it conta...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-419

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a m...

SKU: AF-4732

The 64×64 RGB LED Matrix with 3mm pitch features 4096 bright RGB LEDs in a 192×192mm panel. This high-density display offers a good balance between pixel density and panel size, suitable for indoor signage and video wall applications. This panel uses a non-standard 5-address (ABCDE) multiplexing...

SKU: AF-3845

This 3×4 matrix keypad provides 12 buttons (0–9, *, #) in a sturdy, rigid format. It uses a matrix scanning arrangement requiring only 7 pins to read all 12 keys, making it efficient to connect to Arduino, Raspberry Pi, and other microcontrollers. Header pins are included for breadboard use (som...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: AF-881

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in blue makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K33 driver...

SKU: DF-DFR0647

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...

SKU: AF-5128

The Adafruit MacroPad RP2040 Starter Kit is a complete programmable 3×4 macro keyboard powered by the Raspberry Pi RP2040 microcontroller. This all-in-one kit includes the MacroPad board, key switches, keycaps, enclosure, and hardware — ready to assemble with no soldering required. Program it wi...

SKU: AF-6198 · MPN: ADA6198

A warm-white LED filament shaped as the letter "H", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-5297

The Adafruit Monochrome 1.12" OLED Display packs a 128×128 pixel resolution into a compact screen with the high contrast and crisp readability that OLED technology is known for. Each of the 16,384 white pixels is individually addressable, producing sharp text and graphics with no backlight requir...

SKU: AF-780

Need some indicators? We are big fans of these diffused blue LEDs, as featured in the LoL shield. They are really bright so they can be seen in daytime, and from any angle. They go easily into a breadboard and will add that extra zing to your project. Pack of 25 diffused blue LEDs 3mm diameter 4...