All Products

SKU: AF-5383

This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once battery capacity becomes 100%, 75%, 50%, and 25%. When power is below 25%, only ...

SKU: AF-4410

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your battery via the JST connector — two LEDs show charging status at a glance (red = ch...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-6391 · MPN: ADA6391

This small accessibility tool helps remove LiPoly and LiIon batteries with JST connectors from a board without tugging on the battery wires.The 3D-printed puller slips over the JST PH connector so you can line it up with the socket and gently lift it out. It is handy for anyone who finds tiny bat...

SKU: AF-1759

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger GEMMA to play a sound of your choosing (or write your own) through a small spea...

SKU: AF-878

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K33 driver ...

SKU: AF-1002

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in white makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K33 drive...

SKU: AF-1501

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single build. Program it via the Arduino IDE over the Micro-USB connector — no separat...

SKU: AF-1269

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you only need two data pins to control a full 4-digit display. The HT16K3...

SKU: AF-959

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright blue dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SCL) plus power to control all 64 LEDs — no complex wiring or external driver chips ...

SKU: AF-5882 · MPN: ADA5882

The Adafruit DC Power BFF Add-On lets you power your QT Py or Xiao development board from a DC source up to 20V. The on-board MPM3610 integrated buck converter steps down the input to 5V at up to 1A, with no heat sink required — providing plenty of power for LEDs, WiFi, displays, and small motors...

SKU: AF-1304

The Adafruit Micro Lipo is a tiny USB charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Its gold-plated PCB-style USB connector plugs directly into any USB port — connect your battery via the JST plug and charging begins automatically. Two LEDs indicate sta...

SKU: AF-1863

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendly breakout. There's two ground pins, one 'switched' power pin, and one pin that ...

SKU: AF-877

Drive 4-digit 0.56" tall 7-segment displays with ease using this HT16K33-based I2C backpack. The driver handles all LED multiplexing over I2C, keeping your wiring simple — just two data pins for full numeric display with decimal points and colon. The backpack is stackable with address jumpers on...

SKU: AF-6124 · MPN: ADA6124

This custom-designed 3D-printed enclosure is made specifically for the Adafruit bq25185 USB/DC/Solar Charger with 3.3V Buck board. The snap-together design requires no screws or glue — simply press the two halves together for a secure fit that protects your board during use and transport. The en...

SKU: AF-6091 · MPN: ADA6091

The Adafruit bq25185 Charger is a versatile LiPo/LiIon/LiFePO4 charging board that supports USB, DC, and solar power input. It is an excellent upgrade from MCP73833 or MCP73831-based chargers, offering multi-chemistry support, adjustable charge rates, smart power path management, and near-MPPT so...

SKU: AF-774

For those that want to cut, customize, and cap our awesome Digital Addressable RGB LED strips we now have a pack of the little rubber caps. These fit perfectly over the strips, use silicone glue to secure and waterproof them.Comes in a pack of 4 pieces

SKU: AF-1862

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate w...

SKU: AF-4675

A clear acrylic enclosure designed specifically for the Adafruit CLUE board. Laser-cut to accommodate the TFT display, tactile buttons, and capacitive pads, this minimalist case protects your board while keeping all features accessible. Assembly takes less than five minutes with the included nyl...

SKU: AF-3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...