All Products

SKU: SF-LCD-29467 · MPN: LCD-29467

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...

SKU: DF-FIT1023 · MPN: FIT1023

This compact USB camera module is built around a 1/4-inch OV5648 CMOS sensor for 5MP embedded imaging. It captures stills and video up to 2592×1944 resolution, making it suitable for computer vision prototypes, robotics, AI edge projects, smart monitoring and document capture.Autofocus adjusts fr...

SKU: SF-DEV-18440

The Arducam 5MP Plus OV5642 Mini is an SPI-enabled camera module designed for low-cost microcontrollers like Arduino and RP2040. With 5MP resolution and a generous 8MB frame buffer, it supports JPEG compression, multiple capture modes, and RAW/YUV/RGB output formats — all controllable via SPI for...

SKU: DF-KIT0155

The Sipeed Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. Designed for edge AI and IoT applications, it features an onboard neural network accelerator capable of running face detection, image classification, and other machine learning tasks at ...

SKU: AF-1436

The Adafruit Multi-pitch FPC Adapter breaks out 40 pins of flexible printed circuit (FPC) cable to standard 0.1" spaced headers for easy breadboard prototyping. With pads for 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, and 1.0 mm pitch cables, it covers the most common FPC connector spacings in a single vers...

SKU: SF-BOB-28467 · MPN: BOB-28467

A simple breakout board that converts the 22-pin HSTX/camera/display connector to standard 0.1" through-hole pins. Perfect for prototyping and debugging when you need direct access to all the signals from your RP2350 or Raspberry Pi 5's high-speed interface. Includes a 22-pin flex cable for conn...

SKU: DF-DFR0639

The Maix Bit is a compact AI development board powered by the Kendryte K210 dual-core RISC-V processor. With 8MB of on-chip SRAM (6MB general purpose + 2MB AI dedicated), a built-in neural network processor delivering hundreds of GOPS, and MicroPython support, it's a powerful and affordable platf...

SKU: SF-KIT-15948

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout as well a...

SKU: AF-4634

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope into a single chip for full orientation tracking. This version featur...

SKU: AF-4407

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcontroller or Raspberry Pi project — like a miniature thermal camera you can integra...

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: AF-3252

The Adafruit Raspberry Pi Zero Case is a compact two-piece polycarbonate enclosure that protects your Pi Zero while keeping all ports accessible. Designed by Mike Doell, it features a sleek black base and clear top that snap together without screws. The case provides slim openings for mini HDMI,...

SKU: SF-BOB-16912

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard power supplies, generated from 3 – 5.5V, and a master clock. Local power supplies,...

SKU: WS-31137 · MPN: 31137

An ESP32-S3 development board with a built-in 3.5" IPS capacitive touchscreen display (320×480, 262K colours). Powered by the dual-core Xtensa LX7 processor running at up to 240 MHz with Wi-Fi and Bluetooth 5 (LE) connectivity, this board is designed for interactive IoT devices, smart home interf...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-3657

The Adafruit ATSAMD09 Breakout with seesaw is a versatile I2C peripheral board built on the Adafruit seesaw framework. Seesaw is a near-universal converter that lets you add GPIO, ADC, PWM, and more to any I2C-capable microcontroller or single-board computer — all over a simple I2C connection. R...

SKU: WS-21797

OV9281-120 mono Camera for Raspberry Pi, Global Shutter, 1MPOV9281-120 mono camera1MP, Global Shutter, 110°FOV Compatible with Raspberry Pi series boardsDevice Support Raspberry Pi series Supports 4B / 3B+ / 3A+ / Zero / Zero 2 W, and CM3/3+/4 (extra adapter board required) S...

SKU: AF-2258

The Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case is a durable polycarbonate enclosure with a smoke-tinted base and clear top. Designed by Mike Doell, it offers a clean, professional look while keeping your Pi protected and fully accessible. The case features slim openings for all cables, a bevell...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-2765

The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for the X-axis and one for the Y-axis. The voltage output follows the motion of th...