All Products

SKU: LB-LS6842

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...

SKU: AF-3093

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit see...

SKU: AF-1732

A high-power 4" (102mm) full-range speaker rated at 20W continuous with 4Ω impedance. The wide frequency response of 60Hz–24kHz delivers clear audio across the full spectrum, making it suitable for projects where you need room-filling sound. Originally designed for automotive use, this speaker w...

SKU: AF-1752

A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks — ideal for portable and battery-powered audio projects. Volume can be controll...

SKU: AF-3351

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input ca...

SKU: DF-DFR0720

This is a small size and cost-effective Bluetooth 4.2 Audio Receiver module with dual 5W power amplifier circuits. It supports auto-reconnect and can be powered by micro USB or 3.7V lithium battery. The module can be turned into a stereo Bluetooth speaker when connected with two speakers. Also, y...

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: AF-2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: AF-3923

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin ...

SKU: EC-RPA08821S

This speaker equipped with 360-degree sound field integrates a cone design with a custom-built speaker to project sound in all directions. It can offer deep and rich sound with HI-FI result for it comes with 1.4 subwoofers and the vacuum base. It is a new concept integrative portable mini speaker...

SKU: AF-4227

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin ...

SKU: AF-3988

The Adafruit Prop-Maker FeatherWing is an all-in-one add-on for building light sabers, cosplay props, interactive toys, and wearable effects. It combines NeoPixel LED driving, a 3W RGB LED driver, a motion-sensing accelerometer, and a Class D audio amplifier onto a single Feather-format board — e...

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: AF-3957

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted NeoPixel driver, and a 3W I2S audio amplifier — all managed over I2C via the Adafru...

SKU: AF-6421 · MPN: ADA6421

The Adafruit PCM5122 I2S DAC delivers excellent stereo line-level audio with 112dB SNR and -93dB THD. Out of the box it works in hardware mode — just pipe I2S audio in with no MCLK or configuration needed. For advanced control, switch to I2C or SPI mode to access software volume, EQ, filtering, a...

SKU: AF-1898

Listen up! This 1.1" (~30mm) diameter speaker is the perfect addition to any breadboard-based audio project where you need 8 Ohm impedance, and have 0.2W or less of power. The two pins are 15mm / 0.6" apart and fit perfectly in a breadboard or perfboard. This speaker has a durable protectiv...

SKU: AF-1891

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). We particularly like th...

SKU: AF-1313

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm apart.Works great with our Wave shield or class D amplifier board.

SKU: AF-1890

Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it's very simple and its metal body is extremely lightweight. It's very similar to the spe...