All Products

SKU: AF-4374

The Adafruit BrainCraft HAT is a Raspberry Pi 4 add-on board designed for machine learning and AI projects at the edge. It combines a display, stereo microphones, audio output, camera connector, user controls, and sensor ports into a single HAT, providing everything needed to build audio and vide...

SKU: AF-1455

The Adafruit 12-Channel 16-bit PWM LED Driver uses the TLC59711 chip to provide 12 channels of constant-current, 16-bit PWM output — the highest resolution PWM driver available. Designed specifically for precision LED control, this board delivers smooth, flicker-free dimming across all channels. ...

SKU: AF-3928

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixels, capacitive touch sensors, and a speaker — all managed over I2C via the Adafr...

SKU: AF-4863

The Adafruit CYBERDECK HAT is a GPIO extender for the Raspberry Pi 400 that lets you plug full-size HAT displays and add-on boards into the back of the Pi 400 at a convenient angle. It duplicates every GPIO pin from input to output, so your HATs work without any pin limitations. In addition to t...

SKU: AF-801

The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. It's designed for the original Pi Model A/B but also works with any 40-pin Pi (A...

SKU: AF-1968

An unassembled mini pan-tilt bracket kit that provides two-axis motion for cameras, sensors, or other small payloads. The mechanism pans approximately 180° side to side and tilts approximately 150° downward, depending on the servos used. This version comes without servos, so you can pair it with...

SKU: AF-2264

The Adafruit FT232H Breakout turns your computer into a versatile interface for hardware protocols. Using the FTDI FT232H chip with its multi-protocol synchronous serial engine, you can communicate directly with I2C, SPI, JTAG, and serial UART devices — plus read and write digital GPIO pins — all...

SKU: PR-PIM510

A Raspberry Pi-powered plant monitoring system that tracks moisture levels across up to three pots, alerts you when plants need water, and can even automate watering with optional pumps. The kit centres around the Grow HAT Mini, a compact add-on board with a built-in LCD, buttons, buzzer, and lig...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: AF-1085

Add precision analog-to-digital conversion to any microcontroller with the ADS1115 breakout. This 16-bit ADC delivers 860 samples per second over I2C, with four single-ended or two differential input channels and a built-in programmable gain amplifier (up to 16×) for boosting small signals. The ...

SKU: AF-3467

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of blue LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual ...

SKU: AF-3203

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a solderless...

SKU: AF-4120

The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of green LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128-LED display — no soldering required. Each of the 128 LEDs supports individual...

SKU: AF-3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: AF-2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: AF-2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-5000

The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI device, or disk drive — no separate USB-to-serial chip needed. This version in...

SKU: AF-3591

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converter, automatic bootloader reset, and LiPo battery charging, it's a fully featured ...