All Products

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...

SKU: SS-101020023

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.   Features Grove compatible interface Wide supply vo...

SKU: SS-ELB141D1P

This is a Protoshield kit with the same connector as Electronic Brick, you can solder something onto this and use it as a regular Electronic Brick.    You will also need this cable to connect it to Sensor shield. http://www.seeedstudio.com/depot/electronic-brick-fully-buckled-4-...

SKU: SS-320990008

This is HDMI male connector without wire. It exposes all the HDMI wire as bare pins so that you can hack it easily.   Features: Bare connector Easy to hack   Specification: Current rating: 0.5A AC,DC Voltage rating: 40V AC,DC Temperature range: -40℃ to +85℃ Withstand vo...

SKU: SS-321010018

This product is apply to USB HUB,Mini speaker,Power Bank,MP3,MP4,MP5.  It can be used to charge.   Features: DC 3.5*1.35mm connector 100cm in length USB Charging Use to DC 3.5mm charge port Wire Diameter：24AWG  

SKU: PT-HDMI-CAP-USBC

A compact HDMI video capture adapter with a USB-C output that captures up to 1080p at 60Hz. Plug in an HDMI source — such as a camera, gaming console, or second computer — and the adapter appears as a standard webcam device on your Mac or PC, ready for use in any recording or streaming applicatio...

SKU: SF-PRT-15109

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: DF-DFR1083 · MPN: DFR1083

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to developing cost-effective, real-time applications, the Portenta C33 features the ARM® ...

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: LB-LS7878

This 3.5mm to 6.5mm audio jack adapter allows you to connect devices with a standard 3.5mm audio plug (such as headphones, phones, tablets, or laptops) to equipment with a 6.35mm (6.5mm) jack socket, including guitar amplifiers, mixers, speakers, and professional audio equipment.The adapter provi...

SKU: DF-FIT0380

A 10W high-power warm white LED module with an integrated 60° focusing lens. The lens narrows the beam compared to the standard 120° version, concentrating the 500-lumen output into a tighter spot — ideal for searchlights, spotlights, and directional lighting. The module consists of nine separat...

SKU: EF-EF11096

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.

SKU: AF-4045

This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...

SKU: LB-LR0062

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of 2-30 cm at an angle up to 35 degrees.The detection distance can be changed by u...

SKU: AF-5960 · MPN: ADA5960

The Adafruit CH552 QT Py is a compact development board built around the WCH CH552, an enhanced 8-bit 8051 microcontroller. Running at 16 MHz with native USB device support, it packs a surprising amount of functionality into the tiny QT Py form factor with STEMMA QT / Qwiic I2C connectivity. The...

SKU: AF-2176

Keep your 5 mm LEDs securely mounted with these chromed metal LED holders featuring a narrow bevel finish. Slot the LED through the opening, insert the plastic retaining cap, and tighten the threaded washer for a clean, professional look on any panel or enclosure. Key Features Chromed Metal – ...

SKU: LB-EAGLED-LED-G

EagLED LEDs were made for e-textiles! This is a simple pack of green wearable leds that are still attached to one another. Simply snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up! It is made in Australia and is a lower cost e-textiles led alternativ...

SKU: AF-5068

A 12-pack of clear DSA keycaps for Cherry MX and compatible switches. The transparent design allows RGB backlighting to shine through clearly, making them ideal for custom keyboards, NeoKey projects, and macro pads where per-key lighting matters. DSA profile keycaps are fully symmetric in all fo...

SKU: EC-AS402812NP

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onboard Arduino supply and as long as you aren’t lighting up all the LEDs full powe...