All Products

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: SF-PRT-10877

This 2×3 (6-pin) shrouded header with 2.54 mm (0.1″) pitch provides a keyed connection that prevents cable mishaps. The shroud ensures correct orientation when connecting ribbon cables or IDC connectors. Key Features 6-Pin (2×3) – Dual-row header layout Shrouded/Keyed – Prevents incorrect cab...

SKU: SF-CAB-15463

This panel mount USB-B (female) to micro-B (male) cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm panel mount holes, spaced 28.5mm apart.

SKU: AF-420

A 16×32 RGB LED matrix panel with 512 individually controllable LEDs at 6 mm pitch. Two IDC connectors on the back (input and output) allow panels to be daisy-chained for larger displays. Driven at a 1:8 scan rate using 12 digital pins and a 5V supply. These panels are designed for high-speed pr...

SKU: AF-2104

This 2x8 (16 pin - 0.1" spaced) IDC Breadboard Helper is great in conjunction with any 16-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header p...

SKU: AF-1675

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boards. Key Features 1.27mm (0.05") Pitch – 2×5 box header connectors on both end...

SKU: AF-2278

The 64×32 RGB LED Matrix Panel with 4mm pitch features 2048 bright RGB LEDs in a 256×128mm panel. This mid-range pitch offers a good balance between pixel density and viewing distance, suitable for indoor displays viewed from a few metres away. The panel features two IDC connectors on the back (...

SKU: AF-4198

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs! USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has ...

SKU: AF-607

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with good white balance uniformity. On the back, dual IDC connectors (input and output...

SKU: AF-2102

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...

SKU: AF-2026

A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 5mm pitch. Designed for indoor use with a wide 160° viewing angle and pre-balanced white output, these panels look great in ambient light. The slightly larger pitch than 4mm panels makes them well-suited for displays viewed at moderate di...

SKU: SF-PRT-08535

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key Features 10-Pin (2×5) – Standard AVR ISP programming pinout IDC Connectors – K...

SKU: AF-752

This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...

SKU: AF-5441

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center, so it can flex around enclosures easily. This cable is 1 meter long, comes in Adafruit black. CAT6 means it's great for Ethernet-based LANs and other data networks. U...

SKU: AF-4199

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to USB C plugs!USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has inse...

SKU: AF-1199

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...

SKU: AF-762

A PG-7 cable gland for creating weatherproof cable pass-throughs in enclosures. Install over your power, data, or sensor cables and the gland forms a seal around the cable, keeping moisture and debris out of your project box. Specifications Size – PG-7 Cable Diameter Range – 0.118″ to 0.169″ ...

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: EC-CDE20032P

An Arduino Uno shield that makes it easy to drive a 16×32 RGB LED matrix panel with a HUB75 connector. Instead of wiring up 12 individual jumper wires, this shield provides a matching 2×8 IDC connector for a clean, reliable connection between your Arduino and the panel. The shield also includes ...

SKU: AF-4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...