All Products

SKU: AF-1151

If you have a computer or tablet or device with HDMI output but you want to connect it to a projector, monitor or display with VGA input, you have come to the right place! This nifty adapter cable has a classic HDMI plug connector at one end and at the other end a DB-15 VGA connector (it has hex ...

SKU: WS-13857

A 7-inch IPS HDMI display with case from Waveshare, featuring 1024×600 hardware resolution (configurable up to 1920×1080 via software). The toughened glass capacitive touch panel (6H hardness) provides smooth 5-point touch input on supported systems. Compatible with Raspberry Pi, Jetson Nano, Be...

SKU: AF-910

Yes, this is an adorable miniature television! The visible display measures only 1.5" diagonal, the TFT comes with a NTSC/PAL driver board. The display is very easy to use - simply connect 6-12VDC to the red and black wires, then connect a composite video source to the yellow and black wire. Voil...

SKU: DF-DFR0982

Features  Enhanced CPU performance, it features the Intel 11th generation mobile quad-core processor N5105 and offers significantly improved performance.  Upgraded to 8GB RAM and 64GB eMMC, substantial high-bandwidth RAM and speedy solid-state drive to smoothly run your multiple applic...

SKU: AF-3537

Do you have a S-Video display, projector or monitor that is not compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI to S-Video, for older video devices that might not have an HDMI input. S-Video has better performance than plain "RCA" composite NTSC/PAL a...

SKU: DF-DFR0515

The FireBeetle OSD Character Overlay Module adds on-screen character display to composite video (AV) signals. Based on the AT7456E OSD chip, it overlays up to 16×30 characters onto NTSC or PAL video feeds — ideal for adding timestamps, telemetry data, or status information to camera and monitorin...

SKU: LB-LR0601

This VGA expansion board adds a VGA output to your Raspberry Pi via the GPIO header, while leaving the HDMI connector free for a second display or other use. Compatible with Raspberry Pi 3B, 2B, B+, and A+. Setup requires a simple configuration change — just add a few lines to your Pi's config.t...

SKU: EC-RPA08067R

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI display with high-res, high-contrast visibility. The display is very easy to use - simply connect the 12VDC adapter to the 2.1mm center-positive DC jack, then connect a di...

SKU: AF-1914

The Raspberry Pi Model B+ is an updated revision of the original Raspberry Pi Model B, featuring improved power supply design, more USB ports, expanded GPIO, and a more convenient microSD card slot — all in the same compact form factor. Powered by the same Broadcom SoC running at 700 MHz with 51...

SKU: LB-LR0293-5

This HDMI-to-VGA adapter cable converts a digital HDMI signal to analogue VGA output, letting you connect HDMI devices like a Raspberry Pi, laptop, or media player to a VGA monitor, projector, or LCD screen. It features a built-in conversion chipset and requires no external power — it draws power...

SKU: DF-DFR0578

Gravity: I/O Expansion Shield for OpenMV Cam H7 & H7 Plus is an expansion shield specially designed for the OpenMV Cam H7 and OpenMV Cam H7 Plus. It is compatible with various sensors and electronic modules of Gravity series, plug and play, no soldering required. It not only helps you avoid the c...

SKU: LB-LS0100

HS0100 White 1080P Mini HDMI  To VGA  Converter Box Adapter

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: LB-LS1810

Great for hooking up your Raspberry Pi 4 to a VGA monitor! This HDMI Male to VGA Female adapter cable lets you connect a standard analog monitor, projector, or LCD screen!  *Note - colour may vary.  Either White or Black

SKU: DF-FIT0858

This DB15 Male to RJ45 Female Adapter can be used to handle data communication between VGA interface devices with one RJ45 network cable, or as an extender to extend VGA signal to about 20m.Two modules are required for video transmission. It enables to extend signal to 20m with CAT5/6 network cab...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...

SKU: LB-LS1719

A Mini HDMI to VGA adapter for connecting the Raspberry Pi Zero or Zero W to VGA monitors, projectors, and TVs. Converts the digital Mini HDMI signal to analogue VGA, supporting resolutions up to 1080p. Key Features Mini HDMI to VGA – Converts Mini HDMI output to VGA input Up to 1080p – Suppo...

SKU: DF-DFR0514

This is a 2*16 character RGB LCD+Keypad plate for Raspberry Pi. We made improvements in the wiring connection based on the previous LCD display as well as left out the contrast adjustment function, so the product can be pretty easy to use, and users can spend time focusing on the most important p...

SKU: DF-FIT0859

This DB15 Female to RJ45 Female Adapter can be used to handle data communication between VGA interface devices with one RJ45 network cable, or as an extender to extend VGA signal to about 20m.Two modules are required for video transmission. It enables to extend signal to 20m with CAT5/6 network c...

SKU: AF-2675

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x32 individual blue OLED pixels, each one is turned on or off by the con...