All Products

SKU: AF-5607

A panel-mount DC barrel jack extension cable that lets you add a clean, professional power input to any enclosure — without cutting custom-shaped holes. The round flange means you only need a standard 1″ (25 mm) drilled hole. Unscrew the plastic nut, insert through the panel, and tighten. Done. ...

SKU: AF-369

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm DC plug on one end, and a screw terminal block on the other. The terminals are labeled with positive/negative assuming a positive-tip configuration (w...

SKU: AF-6075 · MPN: ADA6075

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy power connections. The soft rubber base can be sewn by hand or machine directly i...

SKU: DF-FIT0881

A 28-piece universal DC adapter kit with 5.5 × 2.1mm female connectors converting to a variety of DC barrel jack sizes. Compatible with standard 2.5mm DC male plugs, this kit lets you power laptops, displays, stereos, and other devices when the original power connector doesn't match. Warning: T...

SKU: SF-PRT-10811

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack, with a 2.1mm center pole diameter.Documents:Dimensional Drawing

SKU: AF-2789

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters ...

SKU: AF-5369

This 10W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 1,670mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: DF-FIT0884

This DC 5.5×2.1mm power splitter cable lets you power two DC devices from a single power source. Each cable splits one female DC jack into two male DC plugs, making it easy to share a power adapter between devices. Built with tinned oxygen-free copper wire for stable transmission and minimal sig...

SKU: DF-FIT0539

A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronics that require higher voltage from rechargeable cells. The holder features a du...

SKU: DF-FIT0043

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2.1 mm centre-positive barrel jack. Key Features Hard Plastic Snap (V2) – Easi...

SKU: AF-6153 · MPN: ADA6153

USB-C Panel Mount Cable – Compact & Easy InstallationThis USB Type-C panel mount cable is perfect for adding a USB-C connection to your project enclosure. The compact panel-mount side features a USB-C jack, while the other end provides power, ground, D+/D-, and CC1/CC2 lines for quick integration...

SKU: SF-PRT-11476

This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.Do...

SKU: DF-FIT0886 · MPN: FIT0886

This DC power splitter cable lets you run four DC devices from a single power source. It has one DC 5.5 x 2.1mm female connector splitting out to four DC 5.5 x 2.1mm male connectors, making it handy for tidier low-voltage power distribution.The cable is compatible with DC5.5*2.1 connectors and us...

SKU: AF-3642

A 2.1 mm DC barrel jack with a built-in slide switch, giving you simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it drops straight into existing designs without layout changes. Plug in your power su...

SKU: AF-2697

This USB to 2.1 mm barrel jack cable lets you power 5 V DC devices from any USB port. Simply connect the USB-A end to a computer, USB wall adapter, or USB battery pack, and the barrel jack end to your device. At 1 metre long with 22 AWG wires, it handles higher current draws reliably. The barrel...

SKU: AF-2897

A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power supply as normal. Key Features 2.5 mm to 2.1 mm Conversion – Adapts a 2.5 mm I...

SKU: AF-1466

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...

SKU: AF-1352

A simple 1-to-4 DC barrel jack splitter that lets you power four devices from a single DC power adapter. Features standard 5.5mm/2.1mm barrel connectors with rugged moulded construction. Plug your existing DC power supply into the input jack, and get four identical output plugs ready to connect ...

SKU: AF-5449

A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V output, while an EMARK chip enables full 5A high-current delivery as required by ...