All Products

SKU: AF-1780

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...

SKU: AF-4384

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets...

SKU: DF-DFR0126

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz a...

SKU: DF-DFR0781

INTRODUCTIONThis Bluetooth module features Bluetooth/U-disk/TF-card playback, and Bluetooth call function, supporting simple and clear serial port control function, BLE pass-through, and SPP pass-through functions. The highlight of this product is the dual-mode Bluetooth, which also means that it...

SKU: SF-CAB-08566

A standard 3.5 mm stereo audio cable with a length of 6 ft (~1.8 m). Both ends feature a standard 3.5 mm TRS plug, making it suitable for audio connections, basic data transmission, or carrying analogue voltage signals between devices. Key Features 3.5 mm TRS Connectors – Standard stereo plug ...

SKU: SF-CAB-11580

TRRS connectors are the 3.5mm audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for “Tip, Ring, Ring, Sleeve,” which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the ...

SKU: SF-CAB-18983

A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications Connector – 3.5mm TRS (male) on both ends Conductors – 3 (Tip, Ring, Sleeve)...

SKU: WS-20167

Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wide range audio sampling rate, allows headphone and speaker signal output at the ...

SKU: SF-COM-11144

A ¼″ (6.35mm) stereo audio jack in a right-angle panel-mount configuration. Switched contacts allow you to detect whether a plug is inserted. The jack mounts in an 11mm diameter panel hole and includes a plastic washer and nut for secure installation. Key Features Type – ¼″ (6.35mm) stereo TRS...

SKU: SF-PRT-08032

Low profile 3.5mm stereo audio jack.Documents:Audio 3.5mm Jack Datasheet

SKU: SF-PRT-12639

A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an additional channel — commonly used for microphone input on hands-free headsets or video ...

SKU: SF-COM-11143

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  The outer shell unscrews to reveal solder terminals on the inside of the plug. Sol...

SKU: LB-LS1891

HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. 3.3V - 5V logic levels and can process multiple different formats by setting tw...

SKU: LB-AUSBRD

Light up Australia with the AusBoard. This board is designed and made here in Sydney and has eight WS2812 RGB LEDs.  Each one can be lit up from your Micro:bit and you can use colour to represent different data. Learn the state capitals, represent temperature data, show population perce...

SKU: LB-FISH-FEED

Introducing the perfect solution for busy fish owners - the Automatic Fish Feeder Rechargeable! This handy device is designed to keep your aquarium fish fed and happy even when you're away. With a large 100ML capacity and adjustable 6.3ML per grid dispensing, you can easily customize the amount o...

SKU: LB-LS0835

Do you love your plants?  Do you want the best for them?  Or are you more like me and forget they are there until your mother is about to come over then rush round the house making sure they have been watered? Either way, this kit is for you! The Kit includes: Relay Module Soil mois...

SKU: KS-KS0344

Arduino automatic watering device, an open resource programming kit, makes teenagers acquire the practical knowledge of electronics, machinery, control logic and computer science easily. It is easy to build by slot connection, wooden boards, plus thirteen projects from simple to complex. Furtherm...

SKU: PR-PIM371

The automation:bit is a micro:bit expansion board for controlling and monitoring low-voltage systems up to 24 V. It features analogue and digital inputs, sinking outputs, and a relay — all accessible via 3.5 mm screw terminals. No soldering required. Program it using the block-based Microsoft Ma...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...

SKU: AF-2424

This stepper motor is a little different than the large NEMA-17 types you may be used to. These are often used in gauges for motorcycles and cars to replace the old-style fully-analog type. They have extremely fine step precision of about 1/2 a degree per step, 600 steps for single stepping, f...