All Products

SKU: PR-PIM331

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD!Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-a...

SKU: PR-PIM335

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: SF-GPS-29891 · MPN: GPS-29891

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level positioning, tilt compensation and improved navigation through brief GNSS outages.The...

SKU: SF-GPS-29491 · MPN: GPS-29491

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...

SKU: SF-GPS-29887 · MPN: GPS-29887

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...

SKU: SF-PRT-28765 · MPN: PRT-28765

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mounting pHATs onto Raspberry Pi boards, giving the add-on board a neat, supported...

SKU: SF-GPS-29889 · MPN: GPS-29889

Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning, tilt-aware surveying, industrial robotics and autonomous navigation projects.Th...

SKU: SF-DEV-15945

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an ...

SKU: SF-GPS-29888 · MPN: GPS-29888

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...

SKU: PR-PIM353

scroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your micro:bit, or for animations, graphs, and more! Just slot in your micro:bit, then code scroll:bit with the block-based Microsoft MakeCode editor, or with MicroPython...

SKU: SF-GPS-30384 · MPN: GPS-30384

Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...

SKU: PR-PIM272

Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?) Touch pHAT has six capacitive touch buttons, each with a bright white LED, designed to be completely agnostic about what they're used for. You can even use a dry erase pen to wri...

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: EC-DIS85101D

This 10.1-inch HDMI touchscreen monitor has a high-definition resolution of 1280*800 and supports a viewing angle of 178°, providing an excellent visual experience. It supports Raspberry Pi, Windows, Linux, Ubuntu and other systems, and is also compatible with Raspberry Pi 3/3B+/4B/5, Jetson Nano...

SKU: SF-GPS-29890 · MPN: GPS-29890

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...

SKU: LB-LR0601

This VGA expansion board adds a VGA output to your Raspberry Pi via the GPIO header, while leaving the HDMI connector free for a second display or other use. Compatible with Raspberry Pi 3B, 2B, B+, and A+. Setup requires a simple configuration change — just add a few lines to your Pi's config.t...

SKU: PI-PIM498

The Unicorn HAT Mini is a compact 17×7 RGB LED matrix for Raspberry Pi, featuring 119 individually controllable LEDs and four tactile buttons. Simply pop it onto any 40-pin Raspberry Pi — no soldering required — and use the Python library to display animations, scrolling text, simple images, and ...

SKU: PK-PT2029

This compact HDMI to Micro HDMI adapter lets you connect a standard HDMI cable to any device with a Micro HDMI port. Simply plug your existing HDMI cable into one end and connect the Micro HDMI side to your Raspberry Pi 4, camera, tablet, or other portable device for full HD output to any TV or m...

SKU: WS-30591 · MPN: 30591

A 5-megapixel wide-angle camera module built around the MIS5001 sensor, designed for the Luckfox Pico series development boards powered by the RV1106 chip. With high sensitivity and low dark current, this module delivers clear, low-noise images even in dimly lit conditions. Available in two lens...