All Products

SKU: DF-FIT0956 · MPN: FIT0956

##Introduction The SLogic Combo 8 is a versatile development tool that integrates the functionalities of a logic analyzer, CKLink debugger, DAP-Link debugger, and UART module (USB2UART). It allows for arbitrary switching between these functions via buttons. This 4-in-1 tool offers a maximum sampl...

SKU: AF-4004

Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...

SKU: SF-DEV-17588

The BGM220 Explorer Kit from Silicon Labs is an ultra-low-cost, compact development and evaluation platform for the BGM220P Bluetooth Module. With a mikroBUS socket and Qwiic connector built in, you can quickly add functionality using a wide range of off-the-shelf add-on boards. Programming is s...

SKU: AF-2209

The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access across a wide range of ARM cores — from Cortex-M0 to Cortex-A9. The J-Link is toolch...

SKU: EC-DPO01117E

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...

SKU: AF-2548

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy wheneve...

SKU: SF-DEV-16526

The Alchitry Cu is an affordable FPGA development board featuring the Lattice iCE40 HX with 7,680 logic cells. This SparkFun version adds a Qwiic connector for easy I2C sensor and actuator integration. It can be programmed using entirely open-source tools via Project IceStorm. The Cu provides 79...

SKU: DF-TEL0190 · MPN: TEL0190

RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...

SKU: AF-6066 · MPN: ADA6066

The Adafruit Pixel Shifter is a simple inline level-shifting board for addressable LEDs like NeoPixels (WS2812, SK6812) and similar one-wire-control pixels. It solves the common problem of 3.3V microcontrollers not being able to reliably drive 5V LED strips — no more flickering or strange colour ...

SKU: SF-TOL-20680 · MPN: TOL-20680

Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 fuel gauge IC.It combines a charge-estimation algorithm with direct A/D measurem...

SKU: SF-DEV-17514

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB of DDR3 RAM, a Qwiic connector for I2C integration, and all the same expandabilit...

SKU: SF-KIT-15073

The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...

SKU: DF-DFR0971

This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves, pumps, etc, by Arduino programming.Besides, this module supports 8 different I...

SKU: DF-DFR1085 · MPN: DFR1085

##Introduction The new Arduino UNO R4 comes in two versions: the UNO R4 WiFi and the UNO R4 Minima. It runs on the Renesas RA4M1 (Arm Cortex®-M4) processor, with a clock speed of 48MHz, which provides a 3x increase over the UNO R3. In addition to that, the SRAM has been upgraded from 2kB to 32kB ...

SKU: AF-2653

Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup.  Instead, it's a board from Simon Monk that's kind of like a Motorshield for your Spark Core or Particle Photon th...

SKU: AF-4632

The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connect via STEMMA QT / Qwiic and start reading air quality data with no soldering req...

SKU: DF-SEN0177

The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...

SKU: M5-K023

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, and humidity — making it ideal for air quality monitoring deployments. The PMSA00...

SKU: EF-EF04090

The Octopus PM2.5 module from ElecFreaks is a laser-based particulate matter sensor built around the ZH03B dust sensor. It measures PM2.5 concentration in the air with high consistency and real-time response, capable of detecting particles as small as 0.3 µm in diameter. Part of the Octopus elec...

SKU: DF-SEN0460

The Gravity PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter in three size ranges — PM1.0, PM2.5, and PM10 — and outputs concentration data via I2C. With a minimum detectable particle size of 0.3 µm and a response time under 1 second, it provides real-time, a...