All Products

SKU: AF-258

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ modelThe batteri...

SKU: LB-00238

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector a...

SKU: DF-DFR0535

DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications.   Solar Power Manager is a complete small power and high-efficiency solar power management module. It fea...

SKU: AF-4755

The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input range. Its near-MPPT solar tracking automatically draws the maximum current availa...

SKU: AF-5705

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member of the fourth generation of Witty Pi, and it is designed to work with 3.7V Lith...

SKU: DF-DFR0535-1 · MPN: DFR0535-1

Build a compact off-grid power supply for embedded electronics, IoT nodes and low-power projects with this solar power management kit from DFRobot. It combines a Solar Power Manager board for 9V/12V/18V panels with a compact 9V 220mA solar panel.The controller integrates constant-voltage MPPT sol...

SKU: AF-259

This is a Lithium Ion and Lithium Polymer battery charger based on the MCP73833. It uses a USB mini-B for connection to any computer or 'USB wall adapter'. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-volta...

SKU: AF-2011

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteriesThe batteries ...

SKU: AF-390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: DF-DFR0682

Have you ever been disrupted by a sudden power outage while working? If so, the LattePanda UPS Hat is your best choice!The LattePanda UPS Hat is compatible with the LattePanda 2 Alpha, Delta, and 3 Delta pins and can be installed directly. It uses three 18650 lithium-ion batteries as UPS storage ...

SKU: AF-1570

A compact 3.7 V lithium-ion polymer (LiPo) battery with approximately 100 mAh capacity (0.4 Wh). Thin, lightweight, and powerful, this cell is suited for small wearable projects, IoT devices, and compact electronics where space is limited. The battery comes pre-wired with a genuine 2-pin JST-PH ...

SKU: DF-DFR0559-1

Note: Includes Solar Power Manager 5V and Semi Flexible Monocrystalline Solar Panel (5V 1A). The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application...

SKU: AF-1304

The Adafruit Micro Lipo is a tiny USB charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Its gold-plated PCB-style USB connector plugs directly into any USB port — connect your battery via the JST plug and charging begins automatically. Two LEDs indicate sta...

SKU: AF-3898

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about 1.9 Wh. If you need a larger (or smaller!) battery, we have a full range of LiP...

SKU: AF-4236

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. The battery includes built-in protection circuitry that guards against overchar...

SKU: LB-LS2065

Item Name: LED Solar LampEmitted Color: White (6000K-6500K)&nbsp;LED QTY:20LEDsSolar panel: 0.65W 17% efficiency&nbsp;Li-ion battery: 2.22WH / 1200mAh&nbsp;LED Type:2835 SMD&nbsp;Lumens: 350LM-500LM&nbsp;Delay time:10s&nbsp;Night Sensor:<10Lux&nbsp;Switch: OFF/AUTO&nbsp;Waterproof: IP65&nbsp;LED ...

SKU: DF-DFR0264

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the connection is simple and convenient. Used with the solar battery and lithium battery, you can qu...

SKU: AF-353

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards against overcharging, over-discharging, and overcurrent. The pack includes a JS...

SKU: DF-DFR0208

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will wo...

SKU: AF-4410

The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your battery via the JST connector — two LEDs show charging status at a glance (red = ch...