All Products

SKU: DF-DFR0272

An Arduino-compatible Ethernet shield based on the Wiznet W5200 chip, providing a simple way to connect your Arduino to a network. It plugs directly onto an Arduino Uno or Mega 2560 and supports stacking additional shields on top. An aluminium alloy heatsink is fitted to the W5200 chip for therma...

SKU: DF-DFR0125

The DFRduino Ethernet Shield V2.1 is now released. This version of Ethernet Shield is not only compatible with Mega 1280 and 2560, but also provides a Micro SD card slot for reading/writing. DFRduino Ethernet Shield V2.1 is fully compatible with Ardunio Ethernet Shield. With the offical e...

SKU: DF-DFR0850

The W5500 Ethernet expansion board is a new member of the DFRobot Ethernet family. It integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects.The W5500 chip is a Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connec...

SKU: EC-ASW51001E

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sket...

SKU: DF-DFR0146

The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally open, normally closed, and common pins available on screw terminals. Individual...

SKU: SF-DEV-22692

The Arduino Portenta C33 is a cost-effective industrial-grade module built around the Renesas R7FA6M5BH2CBG Arm Cortex-M33 microcontroller running at up to 200 MHz. It supports MicroPython and Arduino sketches, with onboard Wi-Fi, Bluetooth Low Energy, and 100 Mbps Ethernet for connected applicat...

SKU: AF-6348 · MPN: ADA6348

Add reliable wired Ethernet to your microcontroller project with the Adafruit Wiz5500 Ethernet Breakout Board. The WIZ5500 chip handles TCP/IP over SPI, letting you skip the hassle of WiFi passwords and antennas for a fast, dependable network connection. The breakout includes full level shifting...

SKU: EC-ACS52001S

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB internal buffer — double that of the W5100 — and supports up to eight simultaneous TC...

SKU: EC-SIN16080E

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 2...

SKU: DF-DFR0905

This is the first PLC equipment based on the Arduino Technology designed for a professional use. Taking Arduino Mega2560 as its core control chip, the M-Duino PLC has 17 I/Os including 4 analog and digital inputs, 2 interrupt isolated input, 3 analog outputs, 8 digital isolated relay outputs...

SKU: DF-DFR1033 · MPN: DFR1033

##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...

SKU: DF-FIT0798

An M.2 (A+E Key) to Gigabit Ethernet adapter module designed for the LattePanda Alpha and Delta. Built around the Realtek RTL8111F controller, this module adds an RJ45 Gigabit Ethernet port via the M.2 slot, providing 10/100/1000 Mbps self-adaptive networking with low power consumption. Plug-and...

SKU: SF-DEV-14134

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform for IoT projects without the need for multiple shields. Similar to the Arduino Y...

SKU: AF-3201

Wireless is wonderful, but sometimes you need the strong reliability of a wired connection. The Ethernet FeatherWing adds quick and easy wired Internet to any Feather board — just plug in a standard Ethernet cable and you're connected. Built around the WIZ5500 Ethernet controller, this FeatherWi...

SKU: DF-SEN0539-EN

What is voice recognition?  Voice recognition is a computer technology that recognizes and converts speech signals into editable text or operational commands through analysis. It allows people to interact with computers by speaking without using a mouse, keyboard, or other input devices. ...

SKU: SF-PRT-10037

This is a front faceplate that lets your Crib for Arduino accommodate the Arduino and Ethernet Shield in one secure, clean looking, easy to acces package. Have you ever tried to punch or cut square holes for the Arduino USB, power jack, and Ethernet port? Wow, what a drag that is…nine miles of ...

SKU: DF-DFR1256 · MPN: DFR1256

The Arduino UNO Q is a hybrid development board that combines a Qualcomm® Dragonwing™ MPU running Linux Debian with an STM32 real-time MCU. It is designed for projects that need both single-board-computer style processing and Arduino ecosystem timing control, such as robotics, edge AI and compute...

SKU: DF-DFR0216-2 · MPN: DFR0216-2

This compact DFRobot microcontroller bundle is designed for learning, prototyping and physical computing projects. The DFRduino Uno V3.0 is fully compatible with Arduino UNO R3 and the Arduino IDE open-source development environment, which uses the Processing / Wiring language.The board is based ...

SKU: SS-103030002

The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...

SKU: DF-DFR0600

PYNQ-Z2 is a FPGA development board based on ZYNQ  XC7Z020 FPGA, intensively designed to support PYNQ, a new open-sources framework that enables embedded programmers to explore the possibilities of xilinx ZYNQ SoCs without having to design programming logic circuits. Benefiting from progr...