All Products

SKU: AF-1393

The 96x96 resolution SHARP Memory LCD is no longer made, but we have a higher-resolution 168x144 display available in the shop at https://www.adafruit.com/product/3502 The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of...

SKU: AF-326

This 0.96" monochrome OLED display packs 128×64 individually controllable white pixels into a compact, highly readable screen. Because OLED pixels produce their own light, no backlight is needed — resulting in excellent contrast, low power consumption, and crisp visuals even at this small size. ...

SKU: AF-4440

This compact 0.91" monochrome OLED display packs 128×32 individually controllable white pixels into a tiny, highly readable package. With no backlight needed, OLEDs deliver exceptional contrast and low power consumption — perfect for status displays, sensor readouts, and compact interfaces. The ...

SKU: AF-931

A compact 0.96" (24.4 mm diagonal) monochrome OLED graphic display with 128 × 32 pixel resolution. Driven by the SSD1306 controller over I2C, each white OLED pixel is individually addressable, producing high-contrast, self-illuminated output with no backlight required. The breakout board include...

SKU: AF-1673

We love our black and white monochrome displays but we also like to dabble with some color now and then. Our 1.27" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. The visible portion of the OLED measures 1.27" diagonal and contains 128x96 RGB ...

SKU: AF-4567

The Adafruit 2.23" Monochrome OLED Bonnet gives your Raspberry Pi a bright, high-contrast display that's easy to read from across the room. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying sharp white text, graphics, and animations at up to 30 FPS. With 1...

SKU: AF-5228

A raw 1.3" monochrome OLED display module with 128 × 64 pixel resolution, driven by the SH1106G controller over SPI. This is the same display used in the Adafruit MACROPAD RP2040. Key Features 1.3" Monochrome OLED – 128 × 64 pixel resolution SH1106G Driver – SPI interface 16-Pin FPC Connecto...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: DF-DFR0647

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables, mini consoles, and space-constrained embedded projects where a small, clear dis...

SKU: AF-2478

Add a full-colour touchscreen to your project with this 2.4" TFT LCD breakout. The 240×320 pixel display delivers vivid RGB colour with individual pixel control, driven by the ILI9341 controller with built-in RAM buffering so your microcontroller does minimal work. A resistive touchscreen overlay...

SKU: AF-2719

If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one turned on or off by the ...

SKU: AF-4224

The Adafruit eInk Breakout Friend is a driver board for eInk/e-paper displays with a standard 24-pin FPC connector. It includes all the power supply circuitry and level shifting needed to connect your favourite display (up to tri-colour 4.2") to any development board via SPI. Unlike basic breako...

SKU: SF-LCD-13722 · MPN: LCD-13722

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for useful graphics, status screens and simple game interfaces.It is easy to drive f...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-1895

The Adafruit I2C Non-Volatile FRAM Breakout provides 256 Kbit (32 KByte) of fast, non-volatile storage for your microcontroller projects. FRAM (Ferroelectric RAM) combines the speed of SRAM with the persistence of EEPROM — data is written instantly and retained for up to 95 years at room temperat...

SKU: AF-358

A compact and colourful 1.8" TFT LCD breakout with a built-in microSD card slot, perfect for adding a bright display to any microcontroller project. It communicates over 4-wire SPI and includes its own pixel-addressable frame buffer, so it works with virtually any microcontroller — even those wit...

SKU: AF-1028

Add a large, vibrant tri-colour eInk display to your microcontroller project with this 2.9" breakout board. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of col...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-661

A compact 1″ diagonal OLED display with 128×32 white pixels driven by the SSD1306 controller. Each pixel is individually lit, delivering sharp, high-contrast graphics with no backlight needed — resulting in excellent readability and low power consumption. Communicates via SPI (4–5 pins required)...

SKU: AF-1431

A 1.5" colour OLED breakout with 128×128 RGB pixels and 16-bit colour depth, driven by the SSD1351 controller. Because it uses OLED technology, there is no backlight — blacks are truly black with excellent contrast. The fully assembled breakout includes a built-in boost converter (12V for the OLE...