All Products

SKU: AF-1214

A pack of three Adafruit Perma-Proto Small Mint Tin Size Breadboard PCBs, shaped to fit inside an Altoids "Smalls"-sized mint tin. Each board provides 15 rows of 5-hole connected pads in a breadboard layout, two central power bus lines, and 48 additional wiring holes around the edges — ideal for ...

SKU: AF-571

A value pack of three Adafruit Perma-Proto Half-Sized Breadboard PCBs. Each board mirrors the layout of a standard half-size solderless breadboard with 30 rows of 5-hole connected pads, four power bus rails, and clear silkscreen labelling — making it simple to transfer prototyped circuits to a pe...

SKU: AF-97

A blank metal tin in the classic Altoids mints size — the larger format, perfect for housing electronics projects that need a bit more room. A popular choice for DIY builds and portable project enclosures. Specifications Lid Outer Dimensions – 59.9 × 95mm (2.36″ × 3.75″) Tin Bottom Dimensions...

SKU: AF-16

A blank metal tin in the classic Altoids gum size — perfect for housing small electronics projects. Custom-made with a flattened bottom (instead of rounded) so components sit flush inside. Ideal for building portable USB chargers, MintyBoosts, and other compact builds. Specifications Outside D...

SKU: AF-873

Here's a sticker for the MENTA, a portable minty Arduino-compatible project that fits into a common mint tin. The sticker is sized perfectly for our Altoids-size tin (tin not included). All MENTA orders (placed after 6/22/12) now contain this sticker. These gorgeous stickers are high qua...

SKU: AF-903

Store your project safe and sound in this nice weatherproof box with a clear top. We picked up this box because we like the machinable ABS plastic body and tough clear polycarbonate cover, the built in weatherproof gasket seal, and the easy-open screws that can be taken apart as many times as you...

SKU: AF-5603 · MPN: ADA5603

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver board that handles the multiplexing for you.The onboard driver chip includes its o...

SKU: AF-4103

A simple, solder-free way to make secure wire connections to development boards with large alligator-clip pads. Thread a screw through the pad, wrap your wire around it, and tighten the hex nut to hold everything firmly in place — no soldering or bulky alligator clips required. Compatible Boards...

SKU: AF-1609

The Adafruit Perma-Proto Half-Sized Breadboard PCB mirrors the layout of a standard half-size solderless breadboard, making it simple to transfer prototyped circuits to a permanent soldered board. With 30 rows of 5-hole connected pads, four power bus rails, and clear silkscreen labelling, your co...

SKU: AF-4084

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-1222

The Adafruit GEMMA V2 is a tiny, coin-sized wearable microcontroller board powered by an ATtiny85 processor. At just 28 mm in diameter, it's small enough to fit into any sewable or wearable project, and affordable enough to dedicate to every build. Program it over USB with the Arduino IDE and bri...

SKU: AF-4064

The Adafruit Grand Central M4 Express is a powerful development board built around the Microchip ATSAMD51P20 — a 120 MHz Cortex M4 processor with hardware floating point, 1 MB Flash, and 256 KB RAM. In the familiar Arduino Mega form factor, it brings 70 GPIO pins, dual DACs, 15 analog inputs, 8 M...

SKU: AF-6057 · MPN: ADA6057

SKU: AF-4076

If you have a custom PCB design and you'd like to add a little Bluetooth Low Energy, this module is ultra compact and easy to use. It contains a Nordic nRF51822 Cortex M0 chip that comes integrated with BLE radio as well as most of the supporting circuitry and even a chip antenna. The whole thing...

SKU: AF-5996 · MPN: ADA5996

The Adafruit QT Py CH32V203 is a tiny development board built around the WCH CH32V203G6 — a low-cost RISC-V microcontroller running at up to 144 MHz. In the compact QT Py form factor (Seeed Xiao compatible), it packs USB-C, a STEMMA QT connector, an RGB NeoPixel, and 10 GPIO pins into a board sma...

SKU: AF-5862 · MPN: ADA5862

The Adafruit Grove and STEMMA QT FeatherWing brings Seeed Studio's Grove plug-and-play ecosystem to Adafruit Feather boards. With three analog/digital connectors, one UART connector, two I²C connectors, and a vertical STEMMA QT port, you can quickly connect a range of Grove sensors and modules to...

SKU: AF-1141

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible shield, so you can be logging data within minutes of setup. This R3-compatible ...

SKU: AF-4464

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometers and ±2000°/s gyros aren't enough, this sensor delivers the extended measuremen...

SKU: AF-4197

Add a crisp, paper-like display to your microcontroller project with the Adafruit 2.13" Monochrome eInk Breakout. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. An onbo...

SKU: AF-6482 · MPN: ADA6482

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, including thermostats, cold chain asset tracking, and gas or heat metering, and it can a...