All Products

SKU: AF-1675

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boards. Key Features 1.27mm (0.05") Pitch – 2×5 box header connectors on both end...

SKU: SF-CAB-15364

A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards. Specifications Length – 150mm (~6") Conductors – 10 Connectors – 2×5 pin fe...

SKU: AF-370

A 6" (150mm) IDC ribbon cable with 10-pin 2×5 socket connectors on both ends at standard 2.54mm (0.1") pitch. Commonly used for AVR ISP programming, JTAG connections, and other 10-pin box header interfaces. Key Features 10-Pin (2×5) – Standard box header socket connectors on both ends 2.54mm ...

SKU: AF-1199

A breakout cable with a 10-pin IDC socket connector on one end and individual 0.1" female socket pins on the other, connected by 6 inches (150mm) of colour-coded rainbow ribbon cable. Useful for breaking out 10-pin headers to individual connections on a breadboard or test setup. Key Features 1...

SKU: AF-752

This 1.27mm pitch, 2x5 male SMT Box Header is the same one used on our SWD Cable Breakout Board. The header alone is great if you want to incorporate this piece of hardware with your own software. We're specifically selling it so you can solder it onto our nRF52 Feather to add SWD debu...

SKU: AF-2743

This compact adapter board makes it easier to work with ARM development boards that use the slimmer 2x5 SWD programming connector. It is designed for 0.05 inch / 1.27mm pitch SWD cables, commonly found on small Cortex M0 and Cortex M3 boards.It is useful when connecting JTAG/SWD debugging tools s...

SKU: AF-4048

A compact 1.27 mm (0.05") pitch 2×5 mini SWD box header with a half-shroud and key-notch. A smaller alternative to full-shroud SWD headers, taking up much less board space while remaining compatible with standard 10-pin 1.27 mm IDC (SWD) cables. Commonly found on ARM Cortex development kits, thi...

SKU: AF-2102

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre of a breadboard and a male header that plugs into the top of the socket. A prac...

SKU: AF-5327

A compact 0.05" pitch (1.27mm) thru-hole female socket header in a 2×5 (10-pin) configuration. Originally designed for use with the PM2.5 Air Quality Sensor (PMSA003I) and its breakout board, this header is also handy for your own sensor and prototyping projects. These headers match standard SWD...

SKU: AF-2094

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable.  It's helpful for using products like the JTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector. This ...

SKU: SF-PRT-15363

A compact 2×5 pin female through-hole header with 1.27 mm (50 mil) pitch. This is the standard configuration used for JTAG and SWD debugging connections on microcontroller boards. Specifications Configuration – 2×5 (10 pins total) Gender – Female Pitch – 1.27 mm (50 mil) Mounting – Through-...

SKU: SF-PRT-08535

This 2×5 (10-pin) IDC ribbon cable with 2.54 mm pitch connectors is commonly used for AVR ISP programming and general-purpose communication between boards. The cable is 6 inches (approximately 15 cm) in length. Key Features 10-Pin (2×5) – Standard AVR ISP programming pinout IDC Connectors – K...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: SF-DEV-20748 · MPN: DEV-20748

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and you can swap processors or functions to suit your project.The board provides USB...

SKU: SF-PRT-10650

These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which makes it easy to add as many mid-cable connectors as you need.

SKU: PL-1025

The 0.100″ (2.54 mm) 2×5-Pin Straight Female Header is a double-row, 10-pin socket strip designed to mate with standard 0.1″ pitch male headers. The 2×5 configuration is one of the most widely used dual-row sizes, matching standard 10-pin ribbon cable connectors and programming headers. This pin...

SKU: SF-PRT-08506

A 2×5 (10-pin) shrouded box header on standard 0.1" (2.54 mm) pitch. The keyed shroud prevents reversed cable connections, making it ideal for programming headers, data buses, and other multi-pin interfaces. Key Features Shrouded & Keyed – Polarised housing prevents incorrect cable orientation...

SKU: SF-PRT-22890 · MPN: PRT-22890

This compact unshrouded header provides a 2x5 pin connection in a fine 1.27mm pitch format, making it suitable for densely packed boards and small interconnects.It is an SMD header, so it is intended for surface-mount PCB layouts rather than through-hole mounting. The unshrouded design keeps the ...

SKU: DF-DFR1015

Multiple-output DC–DC converters are essential in a multitude of applications where different DC output voltages are required.This DC-DC step-down voltage power module converts 7.5V~30V input to an output of 3.3V/5V/9V/12V (default to 5V), which can be selected by short-circuiting the correspondi...

SKU: DF-SEN0664 · MPN: SEN0664

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...