All Products

SKU: AF-5743

The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of your GPIO or analogue pins — just connect via STEMMA QT / Qwiic and start reading i...

SKU: AF-512

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, proportional X and Y readings for accurate positional control. The breakout board ...

SKU: SF-COM-16273

A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select button activates when the joystick is pressed down. The mechanical parts are mostl...

SKU: AF-2765

The Mini 2-Axis Analog Thumbstick is a compact, self-centring joystick with a black rocker cap, similar in style to PSP joysticks. It provides smooth directional analogue input using two 10 kΩ potentiometers — one for the X-axis and one for the Y-axis. The voltage output follows the motion of th...

SKU: PI-PIM462

The Picade X HAT turns your Raspberry Pi into a retro arcade console by adding joystick and button inputs, a 3 W I2S DAC/amplifier for audio, and a safe power on/off system — all through a single HAT that powers your Pi via USB-C (no separate power supply needed). Female Dupont connectors make w...

SKU: EC-ACS77312JS

Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-pad style input for navigation, gaming, and menu control. The shield sits direct...

SKU: AF-3103

Sometimes a simple analog control device can be the perfect tactile solution for your project, but they can be surprisingly hard to come by. Luckily we've found a low cost, quality PSP 3000 2-Axis Analog Thumb Joystick to fulfill your directional analog input needs! This is a replacement ...

SKU: PR-PIM034

An analogue joystick module for the Pimoroni Flotilla ecosystem, featuring a two-axis thumbstick with a built-in click button. Use it as a game controller, to steer a robot, or as a general-purpose input device. Key Features Analogue Joystick – Two-axis control with centre return Click Button...

SKU: YH-6000100071

The Yahboom Gamepad is a game controller expansion board for the BBC micro:bit, featuring a joystick, four control buttons, programmable RGB LEDs, a buzzer, and multiple sensor interfaces. It doubles as both a standalone gaming device and a controller for micro:bit-powered robots and cars. The b...

SKU: AF-444

Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or portable project. The joystick is a 'self-centering' analog-type. That means it basically a...

SKU: AF-3632

The Adafruit Joy FeatherWing adds a 2-axis joystick and five buttons to any Feather board over I2C — no GPIO or analogue pins consumed. Using Adafruit's Seesaw technology, an onboard helper microcontroller reads the joystick and button inputs and presents them as a clean I2C interface, compatible...

SKU: EF-EF03417

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...

SKU: LB-LS1025

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this kit is ready to connect to a Raspberry Pi, PC, or Mac. The USB encoders present a...

SKU: AF-4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: SF-KIT-14051

The SparkFun Wireless Joystick Kit gives you a customisable wireless controller for XBee-based projects. Built around the SAMD21 microcontroller, it provides a flexible alternative to hobby RC transmitters — configure it your way at a fraction of the cost. The kit can be assembled in two configu...

SKU: RP-SC0329 · MPN: SC0329

Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you interact, play, and explore with a flick of your thumb? That’s the magic of the Se...

SKU: AF-5753

Bring your classic PC joystick back to life. This adapter board takes any legacy DE-15 game port joystick and converts its analogue X/Y axes and two buttons to I2C via an onboard ATtiny816 running the Adafruit seesaw firmware. No analogue inputs needed on your microcontroller — just plug in a STE...

SKU: AF-802

The Adafruit 1.8" Colour TFT Shield is a plug-and-play display solution for Arduino, combining a bright 128×160 pixel TFT screen with a microSD card slot, 5-way joystick navigation switch, and three tactile buttons. This R3-format shield works with any Arduino or Metro board including the Metro M...

SKU: LB-LS7051

Five-Direction Navigation Button Switch — Game On, Maker Style!Ready to level-up your next Arduino or microcontroller project? The Five-Direction Navigation Button Switch Module is your ticket to classic game controls, menu navigation, or anything else that demands precise, tactile feedback. Just...

SKU: SF-COM-17263

This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick.