All Products
Showing 1-20 of 60 products
Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016
·
A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your...
SparkFun Qwiic Speaker Amp
The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo, filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. gain), Dynamic Range Compression (DRC), Automatic Gain Control (AGC), enable/disa...
Pi-DigiAMP+
The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...
WM8960 Audio Codec Breakout with Headers (Qwiic)
·
This WM8960 breakout is a low-power stereo audio codec board for adding audio input and output to digital projects. The WM8960 works as both a stereo audio ADC and DAC, using I2S for audio data while allowing settings such as I2S configuration and analogue audio routing to be controlled over I2C....
TLV320DAC3100 I2S DAC with Headphone & Speaker Out
·
Add high-quality amplified I2S digital audio to your project with this TLV320DAC3100 breakout. It provides clean stereo audio for 16Ω headphones and/or mono speaker output for a 4Ω-8Ω speaker, making it handy for compact audio builds without a separate amplifier.The board takes BCLK, WSEL and DIN...
RTK Torch GNSS Base/Rover Surveying Device
·
Built for field surveying, this heavy-duty RTK unit combines a multi-band GNSS receiver, internal antenna, battery, Bluetooth, WiFi and a 915MHz LoRa radio in a rugged enclosed design. It is intended to make Base/Rover setup straightforward while handling rough use across varied environments.Gali...
Stereo 20W Class D Audio Amplifier - MAX9744
·
A compact Class D stereo amplifier breakout based on the Maxim MAX9744. It drives two channels of 4–8 Ω speakers at up to 20 W each, powered from 4.5–14 V DC. With up to 93% efficiency, it runs cool without heatsinks — ideal for portable and battery-powered audio projects. Volume can be controll...
High Power Bluetooth Power Amplifier Board
INTRODUCTIONStarting to build your dream Speakers with this Bluetooth Power Amplifier board! This cost-effective high power Bluetooth amplifier board features 100W output power, a volume control button, Bluetooth 5.0 input, and dual-track output. It can be operated at DC 5~24V, and compatible wit...
LG290P Quadband GNSS RTK Breakout (Qwiic)
·
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout and connectors as SparkFun’s GPS-RTK-SMA Breakout - ZED-F9P (Qwiic), making it a...
AMP:BIT class D amplifier for micro:bit with headphone jack
The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...
LilyPad MP3
The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add music and sound effects to fabric creations, wearables, and interactive projects. ...
Stereo 2.1W Class D Audio Amplifier - TPA2012
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when...
MAX98357 + 3W 8Ω 3070 Speaker – Digital Audio Amplifier Kit
This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts digital audio directly over I2S and handles conversion and amplification internall...
SparkFun Mono Audio Amp Breakout - TPA2005D1
This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery life. It can drive an 8-Ohm speaker at up to 1.4 Watts; it won’t shake a stadium, but it will provide plenty of volume for your audio projects. The fully-differ...
Qwiic WAV Trigger Pro
·
This compact audio trigger board is a high-fidelity polyphonic WAV player for interactive installations, instruments, exhibits and embedded sound projects. It plays uncompressed 16-bit, 44.1kHz mono and stereo WAV files from a microSD card, with CD-quality audio and very low trigger-to-sound late...
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
·
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...
Adafruit Audio FX Sound Board - WAV/OGG Trigger - 2MB storage with 2.2W Stereo Amp
·
The Adafruit Audio FX Sound Board with 2×2W Amp is a standalone audio trigger with a built-in stereo Class D amplifier — no Arduino or programming required. Simply drag and drop WAV or OGG sound files over USB, wire up buttons and speakers, and you're ready to go. With 2 MB of built-in flash, it ...
Stereo 3.7W Class D Audio Amplifier - MAX98306
·
This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
LattePanda IOTA x86 SBC - Intel N150, 16GB RAM, 128GB eMMC
·
Built for embedded projects that need desktop-class compatibility in a compact footprint, this palm-sized x86 single-board computer combines an Intel Processor N150 with 16GB LPDDR5 memory and 128GB eMMC storage. It is designed as the next generation of the LattePanda V1, retaining the familiar 8...
