All Products

SKU: EF-EF04081

Octopus Analog Noise Sound Sensor Detection Module is a sensor module based on MIC sound sensing element. Sound Sensor is particularly sensitive to sound intensity, and it can be used to detect ambient sound level. Louder noise brings bigger output Sine wave amplitude. Features: 1. Standard OC...

SKU: LB-LR0003

This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound intensity, while the digital output (DO) triggers high or low based on an adjustable...

SKU: AF-3829

*HONK* *HONK* micro:bit comin' thru! Maybe you've played with the micropython speech module, or maybe you want to have MakeCode sound effects. Well, we couldn't let the other boards have all the audio fun! Now you can make your micro:bit BLURP and BEEP with noise:bit! Just slide noise:bit...

SKU: LB-LR0240

This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read the module to respond to noise events, but it cannot directly interpret or record ...

SKU: SF-PRT-28388 · MPN: PRT-28388

This ground loop isolator is a simple inline fix for unwanted hum and noise caused by ground loops in audio setups. Place it between your audio board and the line-in of an amplifier or other compatible audio equipment.The unit is bi-directional, so either side can be used as the input or output. ...

SKU: DF-SEN0232

The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision readings across a 30–130 dBA range. The output voltage is linearly proportional...

SKU: PR-PIM356

Add sound to your micro:bit projects with noise:bit, a tiny speaker board made for bleeps, bloops, tones and speech.Just slot in your micro:bit and use the sound generation blocks and code in Microsoft MakeCode or MicroPython to create audio in your project. It is handy for simple sound effects, ...

SKU: AF-2133

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins, and you're ready to go. With 2 MB of built-in flash storage, it holds a few min...

SKU: DF-FIT0277

The DFRobot 12V Low Noise DC Motor (Model 28PA51G) is a quiet, high-torque geared motor with a built-in two-phase hall encoder. Designed for applications where noise is a concern, it produces approximately 57–68 dBA under no-load conditions — making it well suited for indoor robotics and equipmen...

SKU: SF-SEN-14262

The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound and an analog representation of its amplitude. The three outputs are simultaneo...

SKU: LB-24-ACTIVE-BUZZ

Introducing the Little Bird Active Buzzer Module, the perfect solution for adding sound effects and notifications to your electronic projects! Unlike passive buzzers, this active module generates sound on its own, making it easier to implement and use in various applications. Its compact and use...

SKU: DF-SEN0325

A 6+1 MEMS microphone array built around seven MSM261S4030H0 high-sensitivity digital silicon microphones. Designed for advanced audio applications including noise suppression, echo cancellation, reverb reduction, and sound source localisation. The array outputs raw digital audio over I2S, elimi...

SKU: SF-BOB-12758

The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up voice, claps, knocks, or ambient noise — the amplified signal is ready to read ...

SKU: MB-11008

Me Sound Sensor is designed to detect the intensity of sound in the surrounding environment. You can use it in sound interative project such as a voice operated switch or build a dancing robot with music. Based on the power amplifier LM386 and the electret microphone, ...

SKU: DF-DFR0940

This power filter board for Raspberry Pi integrates solid capacitors, ceramic capacitors, and tantalum capacitors in a parallel hybrid filtering configuration. It filters low, mid, and high-frequency power noise from your supply, delivering cleaner power to the entire system — particularly benefi...

SKU: AF-3421

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to your microcontroller — eliminating analogue noise and the need for an ADC. With...

SKU: SF-ROB-12567

This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something interesting (or terrible) happens. The buzzer works by making use of two I/O pins on a controller board to create different noises based on the different frequ...

SKU: PI-ADP008

This little USB microphone makes adding a mic. to your Raspberry Pi or computer super easy! It's ideal for adding basic sound capture to your projects. Noise-cancelling will help to filter out unwanted background noise, and there's a little power light to tell you when the mic. is active. Spec...

SKU: AF-6251 · MPN: ADA6251

The Adafruit PCM5100 I2S DAC converts digital I2S audio into clean, high-quality stereo line-level output through a 3.5mm jack. With 100dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pipe I2S data in and get great-sounding analogue audio out. The PCM5100 accepts 16, 2...

SKU: LB-LS0038B

The Buzzer Piezo 20mm is a compact and efficient sound-producing device that is perfect for a variety of electronic projects. With its 20mm diameter, this piezo buzzer is designed to deliver clear and audible sound in a small form factor, making it an ideal choice for applications where space is ...