All Products

SKU: PR-PIM200

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its...

SKU: PR-PIM138

If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio! This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin ...

SKU: PR-PIM263

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way to add audio to you Pi project, and its beautiful artwork evokes an 80s boombox...

SKU: PR-PIM261

A complete internet radio project kit based on the Raspberry Pi Zero W. Includes a Pi Zero W, the pHAT BEAT DAC and stereo amplifier, a 5W speaker, and a retro-styled blue acrylic enclosure. Assembly takes approximately 30 minutes and requires soldering. The pHAT BEAT features dual MAX98357A I2S...

SKU: PR-PIM254

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way to add audio to you Pi project, and its beautiful artwork evokes an 80s boombox...

SKU: PR-PIM206

The Micro Dot pHAT is a retro-style LED matrix display for the Raspberry Pi, featuring six Lite-On LTP-305 dot matrix modules for an effective resolution of 30 × 7 pixels plus decimal points. Each 5 × 7 matrix is driven by IS31FL3730 LED driver chips over I²C. Use between one and six matrices in...

SKU: PI-COM1301

A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Channels – Red (right) and white (left) for easy identification Through-Hole Termin...

SKU: PR-PIM221

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi. With a relay, analog channels, powered outputs, and buffered inputs — all 24V tolerant — you can connect a wide range of sensors and actuators to your Pi in one neat package. It uses the same Python libr...

SKU: PR-PIM333

Scroll pHAT HD packs a 17×7 matrix of yellow LEDs (119 pixels total) onto a single Raspberry Pi pHAT. Each pixel has individual PWM brightness control, letting you create smooth animations, anti-aliased scrolling text, and detailed visualisations. Use it as a scrolling message board for tweets, ...

SKU: PR-PIM214

The Automation pHAT is a compact home monitoring and automation controller for Raspberry Pi in the smaller pHAT form factor. With a relay, three analogue channels, buffered inputs, and sinking outputs — all 24V tolerant — it packs serious control capability into a minimal footprint. Uses the sam...

SKU: PR-PIM259

A complete project kit for building a modern, internet-connected mood light powered by a Raspberry Pi Zero W and the Unicorn pHAT's 32 programmable RGB NeoPixel LEDs. The pendant-style stand and diffuser cast beautifully soft, colourful light — perfect for a bedside table, bookcase, or desk. Set...

SKU: AF-3289

The Pimoroni Automation HAT is a versatile home automation and industrial control board for the Raspberry Pi. With relays, analogue channels, powered outputs, and buffered inputs — all 24V tolerant — it provides a comprehensive I/O platform for monitoring and controlling real-world devices. Each...

SKU: PR-PIM330

Fit a pHAT to your Raspberry Pi Zero without soldering! These spring-loaded pogo pins provide a reliable electrical contact between your Pi Zero and pHAT, making it quick and easy to swap boards between projects with no tools required. Specially engineered to be just the right size for a solid c...

SKU: PR-PIM182

The Micro Dot pHAT is a retro-style LED matrix display board for Raspberry Pi, designed to drive up to six Lite-On LTP-305 LED matrices. Each 5×7 pixel matrix includes a decimal point, giving you an effective display area of 30×7 pixels across all six modules. Use between 1 and 6 matrices in you...

SKU: AF-3182

The Pimoroni Mini Black HAT Hack3r breaks out all 40 GPIO pins from your Raspberry Pi while still allowing a HAT or pHAT to sit on top. Connect via the included ribbon cable and access every pin — labelled with function name, BCM number, and physical pin number — for easy debugging, prototyping, ...

SKU: PR-PIM213

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with indicator LEDs on every channel for at-a-glance status monitoring. Connects to t...

SKU: PR-PIM483

Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colour display, and playback control buttons. This board is perfect for upg...

SKU: PR-PIM484

Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the built-in colour LCD and playback control buttons.The push-fit connectors on Pir...

SKU: PR-PIM334

A whole heap of LED pixels with individual brightness control, for scrolling messages, animations, and more - Scroll pHAT HD! Scroll pHAT HD packs 17x7 pixels (119 total) onto a single pHAT, and gives you full PWM brightness control over each pixel. Create beautiful animations and even anti-...

SKU: PR-PIM275

The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows of 8, that are ideal as a VU meter, and 6 buttons to control your audio. We've taken the I2S mono DAC and amplifier that we used on Speaker pH...